myGel InstaView™ System | Complete System with Power Supply

• View DNA migration and separation as it happens
• Blue light illumination - won't damage DNA
• Capture high-resolution images without removing the gel from the tank

The myGel InstaView™ comes complete with everything needed to cast, run, and view mini electrophoresis gels, including an integrated power supply. One large (10.5 x 10 cm) or small (10.5 x 6 cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs, and leak-proof casting stand. The power supply connects directly to the gel tank – no more leads to contend with. The connection is guaranteed to be right, every time.

Output voltage can be adjusted to 35V, 50V, or 100V and run time can be set for up to 99 minutes. A magnetic interlock between the gel tank and the lid prevents current from running through the system when the lid is not properly in place.

Once the myGel InstaView™ System is set up, simply slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real-time. An array of blue LEDs emits bright blue light at a wavelength of 465 nm for optimal excitation of common green fluorescent stains such as SmartGlow™, SYBYR™ Green, and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands without any additional equipment or special glasses. When it’s time to document results, place the included gel imaging enclosure over top of the myGel InstaView, and use the camera app on any smartphone to capture high-resolution images without removing the gel from the tank.

Images are easily shared via email or text message or printed.
 

Specifications

InstaView™ Gel Tank

For labs that prefer to use a separate power supply, the InstaView™ Gel Tank is the perfect choice for running, viewing, and documenting electrophoretic separations. The InstaView™ Gel Tank accommodates one large (10.5 x 10 cm) or one small (10.5 x 6 cm) gel tray and is supplied with trays, combs, and a leak-proof casting stand. The gel tank lid includes attached power leads which prevent the unit from operating without the lid properly in place.

Any standard power supply can be connected, including the Accuris myVolt™ Mini and myVolt Touch. The InstaView™ Gel Tank is shaped to allow the mini-LED transilluminator (included) to slide underneath. Blue light, at a wavelength of 465 nm, provides excitation of common green fluorescent stains such as SmartGlow™, SYBR™ Green, and GelGreen. An orange filter is incorporated into the gel tank lid for visualizing the DNA in the gel box without any additional equipment or glasses. The transilluminator can be turned on at any time during a run to track progress and automatically shuts off after 5 minutes.

After electrophoresis, simply place the included imaging enclosure over the InstaView™ Gel Tank to capture high-resolution images with a smartphone. Images are easily printed or shared via email or text message.

Specifications
 

Safety	Physical interlock between lid and tank
Buffer Volume	230 mL
Gel Capacity	1-10.5 x 10 cm or 1-10.5 x 6 cm gels, 0.5 cm thick
Transilluminator	Blue LED, 465 nm
WxDxH (w/enclosure)	7.5 x 8.25 x 5 in /19 x 21 x 14 cm
Weight	1.65lb/0.75kg
Electrical	115V, 60Hz or 230V, 50Hz
Warranty	2-year

  

System & Accessories
 

• Extremely versatile, 17 rotor options
• Advanced programming with automatic rotor recognition
• Available with refrigeration
• 12 x 15 mL and 8 x 50 mL swing out capacity
• 5 Year Warranty 

With 17 available rotor options, the Z326 series defines the term "universal". Swinging bucket rotors and high speed angled rotors are available to accept tubes from 0.2 mL up to 85 mL, making the Z326 series suitable for nearly any laboratory application. Despite an impressive capacity of up to 4 x 145 mL (or 6 x 85 mL), the Z326 is surprisingly compact with both the standard air-cooled model and refrigerated model featuring a width of just over 15 inches.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

Speed Range:    200 to 18,000 rpm

Max. RCF:          23,542 x g

Max. Capacity:  4 x 145 mL

Dimensions:     15.8 x 18.9 x 14.1 in. 

                           (40 x 48 x 35.8 cm.)

                           15.8 x 27.5 x 14 in. (-K)

                           (40 x 70 x 35.8 cm.)

Temp. Range:    -20°C to 40°C (-K)

Weight:               94.6 lbs / 132 lbs

Electrical:           120V, 60HZ

Power (Watts):   455W / 600W

Benchmark™ Rotating Mixer

• Adjustable speed and tilt angle
• Reversing mode, for more intense mixing
• Cold room and incubator safe
• Includes three rotisseries for all common tube sizes

The Rotating Mixer provides gentle to vigorous mixing of laboratory samples up to 50 mL. With adjustable speed control and tilt angle, the Rotating Mixer is ideal for a variety of applications, from mixing blood samples to the preparation of homogenous dispersions.

Three rotisserie tube holders are included for mixing all common laboratory sample tubes and each individual tube holder is rubber coated to provide a secure grip, preventing any "wobble" or loosening during mixing at high speeds.

For more intense mixing, a unique reversing mode is available. In reversing mode, the mixer rotates for up to 360° then stops and rotates in the reverse direction. This back-and-forth motion occurs repeatedly until the set time has expired.

Specifications
 

Speed	Variable, 1 to 40 rpm
Tilt Angle	Variable, 0° to 90°
Capacity	12 x 50 mL, 20 x 15 mL or 48 x 2 mL
Timer	1 second to 9 hours, or continuous
Temperature Range	+4° to +65°C
Dimension	8.25 x 10.5 x 12.5 in 21 x 27 x 32 cm
Weight	7 lbs | 3.2 kg
Electrical	100V to 240V, 50-60 Hz | 25 W
Warranty	2 years

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
  
• Advanced programming with auto-rotor recognition
• Optional high speed rotors, providing up to 24,000 xg
• Available with refrigeration
• 5 Year Warranty 

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique "Mid-Range" swing out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250 mL rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

Benchmark™ TubeRoller Rocking Rollers

• Gentle rolling motion
• Smooth 5° tilting notion
• Accepts tubes and bottles from 8mm to 200 mm                          

Benchmark™ TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers™, bottles, test tubes, centrifuge tubes, and roller bottles. Both models feature variable speed control (2-80 rpm), suitable for the broadest range of mixing applications.
 

Specifications

Typical Tube Capacities
 

Vessel	TR3005	TR3010
12 x 75 mm Tubes	12	26
16 x 100 mm Tubes	8	18
16 x 125 mm Tubes	8	18
15 mL Screw Cap Tubes	8	18
50 mL Screw Cap Tubes	8	18
850 cm2 Roller Bottles	1	2

Jeio Tech General Heating Bath Circulators

Accurate, stable, and efficient temperature management.

The Jeio Tech General Heating Bath Circulator features high pump pressure and flow rate across the entire temperature range (from ambient +10ºC to 150ºC). The powerful variable-speed pump has 1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation.

*Pump Capacities Chart is based on the use of normal-temperature water as the bath fluid.

Main Attributes

• Performance
• Temp. range from ambient +10ºC to 150ºC
• Microprocessor PID control
• Three-point temp. calibration / Automatic tuning / Automatic run
• Accurate, stable, and efficient temperature management by using a powerful variable-speed pump
• 1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation
• Powerful pump pressure and flow rate throughout the whole temperature range
• Convenience
• Bright VFD display with quick adjustable dial knob. (0.1ºC resolution)
• Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
• Convenient memory function of up to three frequently set temperatures
• Corrosion-resistant, leak-proof, rounded-cornered, and easy-to-clean stainless-steel bath with an easy-access drain valve
• RS-232 /USB interface for external control and data collection
• Side handles enable convenient handling and transport
• Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection (when purchased LC GreenBox) 

Safety Attributes

The heating bath circulator has an isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid. This also protects users and samples against direct contact.

Additionally, the complete safety protection system has warning alarms to alert at low fluid level and dry-running, over-temperature, and over-current. There is also a keypad lock function to prevent accidental changes during operation.

Specifications
 

Model	CW3-05 General	CW3-10 General	CW3-20 General	CW3-30 General
Item #	AAH52342U	AAH52352U	AAH52362U	AAH52372U
Bath Vol.	5 L | 0.2 Ct. Ft.	10 L | 0.4 Cu. Ft.	20 L | 0.7 Cu. Ft.	30 L | 1.1 Cu. Ft.
Working Temp. Range	Amb. +18 to 302ºF | Amb. +10 to 150ºC
Temp. Stability	0.09ºF | 0.05ºC	0.09ºF | 0.05ºC	0.09ºF | 0.05ºC	0.09ºF | 0.05ºC
Heat Up Time to 158ºF | 70ºC	15 min.	23 min.	43 min.	55 min.
Bath Opening (W x L)	5.9 x 3.9 In. | 150 x 99 mm	8.3 x 6.1 In. | 211 x 154 mm	11.4 x 8.4 In. | 290 x 214 mm	11.8 x 10.4 In. | 300 x 264 mm
Bath Depth	6.3 In. | 160 mm	7.1 In. | 180 mm	7.9 In. | 200 mm	9.0 In. | 230 mm
Exterior Dimension (W x L x H)	9.0 x 15.6 x 16.7 In. 228 x 395 x 424 mm	11.4 x 17.7 x 17.5 In. 289 x 450 x 444 mm	14.5 x 20.1 x 18.3 In. 368 x 510 x 464 mm	14.9 x 22 x 19.4 In. 378 x 560 x 494 mm
Net Weight	27.6 lb | 12.5 kg	33.0 lb | 15.0 kg	38.6 lb | 17.5 kg	43.0 lb | 19.5
Electrical Requirements	8.6A (120V, 60 Hz)	8.6A (120V, 60 Hz)	8.6A (120V, 60 Hz)	8.6A (120V, 60 Hz)
Warranty	2-Year	2-Year	2-Year	2-Year

 
The lowest controllable temperature depends on variations in room and sample temperatures. Please contact technical support for consultation before purchasing.
Technical data (according to DIN 12876)
In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting.
Bath fluid : Water at 50 / 122
  

Guardian™ 2000 Hotplates and Stirrers

Dependable OHAUS Guardian 2000™ Hotplates and Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15 L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder that accepts the optional support rod. Stirring models include PTFE-coated stir bars.

Main Attributes

• Applications
• Boiling Liquids, Basic Sample and Solution Preparation, Dissolving Buffers and Reagents, Preparing Media, Concentrating Samples
• Display
• Prominent hot top indicator light, green indicator lights when unit is heating and stirring
• Operation
• Simple knob control, stirring up to 1600 rpm, temperature up to 500°C (ceramic top) or 380°C (ceramic-coated stainless steel top), power cord (included), stirring models include PTFE-coated stir bar
• Construction
• Durable metal housing, PET front panel, control knobs, ON/OFF switch for heater disconnect, built-in support rod holder, easy to clean resin, ceramic or ceramic-coated stainless steel tops
• Design Features
• Hot top indicator light to protect user, green indicator lights illuminate when unit is heating and stirring

Guardian 5000™ Hotplates and Stirrers

Generation Guardian 5000™ Hotplate Stirrers are engineered for safety and versatility across research, academic, and industrial settings. They offer powerful heating and mixing, with premium hardware and software to support diverse users safely and reliably. Heating models reach up to 550 °C and feature 3 temperature control modes for quick heating or precise heating without overshoot. Select from 5 models with 3 plate sizes.

Main Attributes 

• Applications
• Temperature Sensitive Chemistry and Biology, Heat Fixation, Solution pH Optimization, Solution Sterilization, Endothermic Reactions, Denaturing of Organic Material, Sample and Solution Preparation, Dissolving Buffers and Reagents, Preparing Media, Boiling
• Display
• Backlit LCD display with white characters, integrated heating/stirring status indicators in green, and a prominent hot top indicator in yellow
• Operation
• 100-120 VAC or 220-240VAC 50/60Hz power entry, rotary switch knob(s) control
• Communication
• RS232 for data logging and remote control
• Construction
• Robust full metal housing, ceramic square top plate or ceramic-coated aluminum round top plate, high performance SmCo magnet
• Design Features
• Large dip angle front panel for easy monitoring from a distance, smooth enclosure surfaces for easy cleaning, audible alarm, IP32 protection, rapid install splashing shield (optional)

• HIGH CAPACITY 4 x 750 mL swing out rotor, 68 x 15 mL or 28 x 50 mL
• Ideal for Tissue Culture applications
• Advanced programming with automatic rotor recognition
• Available with refrigeration

The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750 mL swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50 mL or 68 x 15 mL tubes.

Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.

Specifications

Shel Lab SMI6 Microbiological Incubators

Advanced microbiological incubation.

The SMI6 Shel Lab Microbiological Incubator offers 5.9 cubic feet (166 L) of capacity, making it ideal for general cell culture and constant temperature applications.
 

Touch Screen Interface

The 7-inch capacitive touch screen delivers advanced control and usability, even with gloves.

• Improved real-time clock accuracy
• Modern black color theme
• Easy access to setpoints, alarms, and data export
• On-screen graphing and real-time data for enhanced sample security

Main Attributes

• Door alarm for safety
• Stainless steel interior with viewing door
• Interior outlet for convenience
• 4-20 mA output for chart recorders or facility monitoring
• 24-month limited warranty (extended warranties available in the U.S.) 

With cutting-edge technology and robust design, the SMI6 Digital Incubator ensures precision, reliability, and traceability for microbiological applications.
 

Accuris™ E3200 UV Transilluminator

Accuris™ UV Transilluminators feature space-saving designs, to fit perfectly in any busy laboratory. Three models are available, with a range of intensity settings and viewing surface sizes. Choose your model depending on your application and the size or number of gels to analyze. 

The E3200 offers a large viewing surface of 21 x 26 cm to accommodate larger gels or multiple small gels. High powered, 14W UV bulbs provide higher sensitivity, so the smallest bands of stained nucleic acids can be visualized. The E3200 also features a control knob for continuous adjustment of the UV intensity.

All Accuris™ UV Transilluminators incorporate scratch-resistant, UV filter glass. Peak output emission of 302 nm is ideal for excitation of gels stained with Ethidium Bromide, SmartGlow, SYBR Green and other common gel stains.

Acrylic UV blocking covers allow safe viewing of samples, and friction hinges on the front edge allow positioning of the cover at an angle for gel access.      

Specifications
 

Item	E3200 UV Transilluminator
Light Source	4 x 14W UV Bulbs
Exterior Dimensions (W x D x H)	13.6 x 11.8 x 3.5 In.  | 34.5 x 30 x 9 cm
Electrical	24VDC (AC power adapter is included)
Output Wavelength	Peak at 302 nm
Viewing Surface	8.27 x 10.24 In. | 21 x 26 cm
Weight	5.15 lbs. | 2.3 kg.
Warranty	2 years

Proudly made in the USA! Click here for more made in America products!