PR1MA™ Microplate Microcentrifuge

• Quickly spins down droplets in PCR plates (less than 20 seconds)
• Accepts skirted, non-skirted, standard, and most microtiter PCR plates
• 50% smaller than traditional centrifuges
• Unique rotor design prevents sample spillage 

The PR1MA™ Microplate Microcentrifuge is the first mini-sized centrifuge with a swing-out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the centrifuge lid, the rotor accelerates and the centrifugal force "swings" the plates into a horizontal position, concentrating any droplets on the plate walls to the well bottoms.

Accessories 

• PCRCENT-A02 - This tube adapter for the PCRCENT Plate Centrifuge holds 96 0.2 mL tubes or 8 and 12 position PCR strips. It comes 2 per pack.
• PCRCENT-DWMP - This optional rotor for the PCRCENT Plate Centrifuge has carriers for deep well plates up to 35 mm tall.

Item # PCRCENT is proudly made in the USA! Click here for more made in America products!

PR1MA™ Roto-Mini Series

• Includes tube holders for common tube sizes, 11 x 1.5 / 0.2 mL (pack of 2), 5 x 10-15 mL (pack of 2), 5 x 5-7 mL (pack of 2), 6 x 50 mL (pack of 1)
• Plus model available with variable speed control and advanced shaking / mixing modes: Mix (Oscillating), Pause, Rock

The new PR1MA™ Roto-Mini Series of rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5 mL to 50 mL. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing.

The Roto-Mini rotator is also available in a "Plus" configuration, providing the following additional features:

Item #s RFP2020 and RMP2024 are made in the USA! Click here for more made in America products!
 

• Two separate modes for BEADS AND WATER
• Quik-Cal™, simple in-lab calibration function
• Offers all of the advantages of a "Bead Bath"
• Eliminates constant refills (Burn-out protection)
• Easy (accessory free) securing of tubes and bottles
• Allows angled incubations
• Runs constant (no wait for heat-up)

Specifications 

Proudly made in the USA! Click here for more made in America products!

Worthington LS-Series Cryostorage Systems

Reliable liquid and vapor phase LN2 vial storage.

The IC Biomedical LS-Series provides reliable liquid or vapor phase liquid nitrogen vial storage using convenient, box-style racks. Available in five sizes, these systems support efficient inventory management with rack index location rings, internal location fixtures, and computer-compatible box storage.

In vapor-phase operation, rack top temperatures reach -190ºC for excellent sample protection. Each unit features a high-strength aluminum body, magneformed neck tube, and super-insulated vacuum design for maximum holding times and durability.

Enhanced security options are available for select models. The LS4800 and LS6000 support optional CS100 controllers with remote connection capability and low-level LN2 alarms, while lockable lids help protect valuable samples.

With storage capacities ranging from approximately 3,000 to 6,000 vials, LS-Series systems support a wide range of cryogenic applications, including cell therapy programs, IVF and fertility clinics, research laboratories and universities, biobanks, animal breeding and husbandry, and pharmaceutical and biotech research and development.

Main Attributes

• LN2 storage in liquid or vapor phase
• Vapor-phase rack temperature: -190ºC
• Box-style rack storage with indexing system
• High-strength aluminum construction
• Magneformed neck tube design
• Superior vacuum insulation for extended holding times 

Security Options

• Optional Cryo-Sentry low-level alarm (all models) provides audible and visual alerts when LN2 levels fall below a preset threshold (typically 25% capacity).
• CS100 controller with remote monitoring (LS4800 and LS6000)
• Lockable lids

Worthington K-Series Cryostorage Systems

Reliable liquid and vapor phase liquid nitrogen storage.

K-Series Cryostorage Systems provide secure, efficient storage for biological and research samples in either liquid or vapor phase liquid nitrogen environments. Equipped with advanced electronic controllers, these systems continuously monitor liquid level and temperature while delivering comprehensive alarm protection to safeguard valuable samples.

With storage capacities ranging from approximately 3,000 to over 38,000 vials, K-Series freezers support a wide range of cryogenic applications, including IVF clinics, biobanking, pharmaceutical research, and agricultural storage. Intuitive touch controls, robust construction, and caster-mounted mobility ensure ease of use in demanding laboratory environments.

Main Attributes

• Liquid nitrogen storage in liquid or vapor phase
• Electronic monitoring of temperature and LN2 level
• Comprehensive alarm system for enhanced safety
• Stainless steel vacuum vessel for superior insulation
• Modular, expandable design
• Durable powder-coated cabinet
• Caster-mounted for easy repositioning
• Superior vacuum performance for reduced LN2 consumption
• Scalable Storage for Growing Facilities 

The modular design allows facilities to expand storage capacity by adding additional K-Series modules, minimizing downtime and avoiding full system replacement as research needs grow.

Trusted Sample Protection

• Exceptional insulation maintains stable cryogenic temperatures
• Continuous monitoring ensures real-time system awareness
• Designed to protect samples during access and retrieval

Worthington K-Series Cryostorage Systems are proudly made in the USA!
Click here for more made in America products!
 

Nanoject III™ Programmable Nanoliter Injector

For accurate injection volumes down to 0.6 nanoliters, the Nanoject III™ Programmable Nanoliter Injector is a feature-rich tool designed for precision and usability. With a few taps on the touchscreen, users can program the state-of-the-art unit for efficient single manual injections or multiple injection cycle recipes.

The unit incorporates proven hydraulic technology to ensure accurate, consistent injection volumes. With easy positive micropipette attachments, no O-Ring is required. Enjoy a wide range of applications thanks to user-friendly design coupled with proven technology that gives operators the ability to select and control the injection rate. The Nanoject III™ opens a world of possibilities for lower injection volume management.

Accessories

• Nanoject Glass Capillaries: Replacement capillary tubes. Available in 3.5 In. or 7 In. length. Bores have 1.14 mm O.D.
• Nanoject III™ Collet Kit: Replacement Collet Kit, includes 1 Collet, 1 Chuck, 1 Seal, 1 Replacement wire plunger, and 1 Allan wrench
• Nanoject III™ Rubber Seals: Replacement rubber seals.
• Nanoject III™ Black Seals: Replacement black seals.
• Nanoject II™ O-Ring Kit: O-ring kit, includes 1 collet, 1 small O-ring, 1 spacer, 1 compression O-ring, 1 Allan wrench
• Nanoject III™ Wire Plunger: Replacement wire plunger.
• Nanoject 30 Gauge Needle: 2 In. long, 30 gauge needle
• Nanoject III™ Foot Switch: Easy, hands-free experience for empty and fill/injection functions.

Standard Glass Door Chromatography Refrigerator

Need Cold Storage in a Hurry?

MIDSCI™ Delivers Fast with ABS | American BioTech Supply!

5-8 Days Shipping on Fast Track Freezers & Refrigerators

Check out the Laboratory FastTrack | Pharmacy FastTrack flyers for full details.

  

Items are subject to change without notice. Fast delivery options may end at any time and are dependent on stock availability and location. 

While we strive to ensure the accuracy of all product descriptions and shipping timelines,

delivery times may vary based on factors such as order volume and shipping carrier performance. 

MIDSCI™ and ABS|American BioTech Supply reserve the right to modify or discontinue promotions at their discretion.

All terms and conditions apply.

Standard Glass Door Laboratory Refrigerator

PR1MA™ Touch Power Supply

• Touch screen control
• Bright color display
• Dual orientation, auto-rotating display

The PR1MA™ Touch is a workhorse electrophoresis power supply, ideal for the efficient separation of nucleic acids and proteins as well as basic western blotting applications. Four pairs of output jacks are wired in parallel for connecting multiple electrophoresis tanks. A color touch screen allows quick setting and monitoring of all run conditions, including run time, voltage, and current. Users can select “Constant Current” or “Constant Voltage” during an electrophoresis run, keeping the chosen parameter fixed as resistance changes. The dual orientation design with a rotating display allows the PR1MA™ Touch to be installed in the most convenient location, on a shelf or bench, saving valuable space.

The PR1MA™ Touch features a logical user interface.

Setting up an electrophoresis run couldn’t be easier; simply touch the parameter to select it, press the “up” and “down” arrows to adjust the value, and then touch “Start”. All parameters are always displayed, with no need to toggle between Time, Voltage, or Amperage. In addition, the run status is always displayed.

Specifications

Proudly made in the USA! Click here for more made in America products!

General Purpose Solid Door Manual Defrost Freezer

The Standard Manual Defrost Freezers are intended for general purpose applications where precise temperature control and maintenance are not essential and there are no requirements for temperature alarms. Manual defrost units have been designed to operate without product damaging auto defrost cycles. 

The NSPF units have natural refrigerants.  The Hydrocarbon Manual Defrost Freezers take a large step forward in performance from past solid door general purpose units; offering a digital temperature display and alarm module coupled with a microprocessor temperature controller.

Defrosting of the unit will need to be performed periodically to prevent severe ice build-up.

Corepoint is Going Green!  We are an industry leader in providing a variety of Refrigerators and Freezers that are built with Hydrocarbon Refrigerants, R290 or R600a.

Environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.

Periodic manual defrost is required on these units.

Proudly made in the USA! Click here for more made in America products!

Bullet Blender® 50DX+ 

Extra-powerful Bullet Blender® 50DX homogenizes better and faster. Processes up to 4 tough tissue samples or up to 8 soft samples in parallel. Each sample can be up to 3.5 g of tissue or 3.5 mL of pelleted cells combined with a buffer of up to 20 mL. Use HIPPO™ brand 50 mL self standing tubes with plug seal cap.
 

Air cooling™ minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.

Includes

• 20 Pack of 50 mL HIPPO™ tubes
• 2 Packs of 4 sleeves (8 sleeves in total)
• 12 V DC Wall Plug Power Cord

Basic Starter Kit:

• Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
• 500 uL microspoon and 1.2 mL spoon

Proudly made in the USA! Click here for more made in America products!