Benchmark™ Orbi-Shaker CO₂™

• For optimal growth of suspension cells
• Designed for use in CO₂ incubators
• CO₂, temperature, and humidity compatible
• Remote controllable - adjust settings without opening the incubator door
• Change flask clamps instantly with MAGic Clamp™ magnetic platforms
• 2-year warranty

The new Orbi-Shaker CO₂™ resistant shaker is designed for shaking, mixing, and aeration applications in extreme environments, including CO₂ incubators. It can withstand temperatures from 0-60ºC, humidity levels up to 100%, and won't corrode in a CO₂ environment.

To avoid contamination, unintentional release of gas, or deviations from protocol, both speed and time are set via the included remote-control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber doors.

The instrument is supplied with a 13"x12" non-slip platform. In addition, convenient MAGic Clamp™ platforms (large or small), are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.

Orbi-Shaker™ XL

The Orbi-Shaker™ XL offers a flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 In. platform and a powerful, beltless motor drive, the Orbi-Shaker™ XL is capable of mixing up to five 2 L flasks or nine 1 L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low-speed applications, while the convenient MAGic Clamp™ platform is also available for high-speed mixing of Erlenmeyer flasks, tube racks, or microplates. The MAGic Clamp™ allows for instant flask clamp exchange without the use of tools, screws, or any other hardware.

A remote control is included to allow for setting adjustments of time or mixing speed without opening the door and disrupting the CO₂ environment. The remote module can be stored outside of the chamber and connects to the shaker via a flat (1 mm thickness) cable, that easily passes through a port underneath the incubator door without compromising the seal. The remote module is magnetically attached to the side of the incubator.

• Six-side direct heating for excellent uniformity and recovery
• Integral, MAGic Clamp™ orbital shaker, ideal for suspension cell culture
• Dual Beam IR sensor, for precise CO₂ control
• Stackable design with a belt-less motor that limits vibration and provides a smooth, consistent shaking motion
• Stainless steel chamber with rounded corners for easy cleaning

Ideal for the culturing of non-adherent cells, the Incu-Shaker™ CO₂ Mini combines a precision CO₂ incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture.

With our unique and proprietary heat distribution technology, the incubator provides the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low-speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample-to-sample contamination.

Specifications
 

Temperature Range:	Ambient +5 to 60°C
Temperature Accuracy:	±0.5°C*
Temperature Uniformity:	±0.5°C*
Temperature Increment:	0.1°C
Temperature Stability:	0.1°C*
Speed Range:	30 to 300 rpm
Speed Increment:	1 rpm
Mixing Orbit:	19 mm (3/4 In.)
CO2 Range:.	0 to 20%
CO2 Increment:	0.10%
CO2 Accuracy:	±0.1%
CO2 Sensor:	Dual Beam IR
Time Range:	1 min. to 48 hours (or continuous)
Platform Dimensions:	9.5 x 11.5 in. (23.5 x 29 cm)
Chamber Dimensions:	13.2 x 10.25 x 15.4 In. (33.5 x 26 x 39.2 cm)
Chamber Volume:	46 L
Chamber Material:	Stainless Steel
Exterior Dimensions:	16.5 x 18.3 x 21.8 in. (42 x 46.5 x 55.3 cm)
Weight:	90 lbs | 40.1 kg
Electrical:	120V or 230V, 50-60Hz (350W)

 

* At a set temperature of 37°C

 

MAXIMUM CAPACITY CHART:
50 mL	125 mL	250 mL	500 mL	1000 mL	Micro	15 mL	50 mL
Flasks	Flasks	Flasks	Flasks	Flasks	Plates	Tubes	Tubes
20	12	8	5	4	4	64	30

 

Endeavor™ 5000 Orbital Shakers

Endeavor™ Light Duty Shakers are available in 3 models: 3 mm orbit, 20 mm orbit, or dedicated microplate model. All models can be used in incubators and cold rooms. Stable, accurate, long-term shaking is ensured with the triple eccentric drive and maintenance-free brushless DC motor. Integrated overload and unbalanced detection to protect samples.

 Main Attributes

• Applications
• Microbiology, Molecular Biology, ELISA Assays, Cell Cultures, Immunoassays, Protein Studies, Bacterial and Yeast Cultures, Staining/Destaining, Blotting Techniques, DNA Studies, Solubility Studies, Environmental and Food Sciences, Chemistry, General Mixing
• Display
• Bright, backlit LCD display for speed and time. Timer will count up elapsed time or, when set, timer will count down and shut off shaking when time reaches zero. Green indicator light illuminates when unit is shaking. Easy to navigate menu for advanced features
• Operation
• Simple knob control for timer and shaking, tray with attachment points for flask clamps, tube racks and non-slip rubber mat included. Optional accessories include universal platform and over 20 flask clamps and tube racks. One model dedicated for microplates
• Communication
• RS232 interface provides 2-way communication for data logging and unit control
• Construction
• Durable chemical-resistant polymer housing. Sturdy, easy-to-clean aluminum standard tray with attachment points for accessories. IP21 ingress protection. Robust triple eccentric drive for stable shaking. Brushless DC motor. Control knobs. On/off switch
• Design Features
• Visual and audio alarm when timer counts down to zero or an error occurs. Small footprint to save bench space. Advanced microprocessor control slowly ramps the shaker tray up to the desired speed and avoids splashing. Easy to attach optional accessory platform. 

The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination.

Key Features:

• Six side direct heating for excellent uniformity and recovery
• Integral, MAGic clamp orbital shaker, idea for suspension cell culture
• Dual Beam IR sensor, for precise CO2 control.
• Stackable design with beltless motor which limit vibration and provide a smooth, consistent shaking motion.
• Stainless steel chamber with rounded corners for easy cleaning.

* At a set temperature of 37.0°C

*230V option is also available.

Jeio Tech Benchtop Incubated Shakers

Digital incubating/refrigerating benchtop shakers with optional dedicated platform and universal attachment.

These shakers offer a high shaking speed of up to 500 rpm and a wide speed range even with a heavy workload. Shakers are equipped with a maintenance-free BLDC motor to generate a smooth, quiet, uniform, and yet powerful shaking motion, 19 mm in diameter.

The testing environment is clean and stable, supported by the smooth acceleration and deceleration control. Smooth start and stop functions prevent chemical spills from flasks or test tubes.

Shakers have exceptional temperature performance. A high-velocity fan ensures uniform temperature distribution and rapid thermal recovery after the door is opened. Air-tight silicone door seal provides excellent temperature uniformity.

Temperature range:

• Ambient +5°C to 80°C for IST-3075 / 4075.
• Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R. 

Main Attributes

• Performance
• Competitive high shaking speed up to 500 rpm
• Orbital shaking motion (19 mm diameter)
• Microprocessor PID control
• Three-point temperature calibration / Automatic tuning
• Sustainability
• Eco-friendly design with R-600a refrigerant to minimize greenhouse gas emissions (R models)
• Convenience
• Intuitive touch screen LCD controller with easy icons and logical menus
• Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
• Wide sample monitoring and convenient sample loading
• Convenient sample monitoring without affecting the inside environment
• Three-side transparent acrylic lid with bright LED lamps
• Gas Spring lid supports providing smooth motion, soft opening and closing
• Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process
• Repetitive tasks can be easily performed as the platform stops where it starts
• Corrosion-resistant stainless steel interior
• Built-in RS-232 port and USB port for external control and data collection
• Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection (when purchased LC GreenBox)
• Integrated with 21 CFR Part 11-compliant LC DataKeeper, suitable for GMP audits (option)
• Safety
• Automatic run after power interruption
• Temperature and shaking speed deviation alarm
• Over-current protection, Stalled platform check
• Mechanical over-temperature protection device
• Environment-friendly CFC-free refrigerant (for IST-3075R / 4075R)
• Audible and visible open door alarms 

Specifications
 

Model	IST-3075 Tabletop	IST-3075R Tabletop	IST-4075 Tabletop	IST-4075R Tabletop
Item #	AAH23465U	AAH23565U	AAH23665U	AAH23765U
Temp. Range	Amb. 9 to 176ºF | 5 to 80ºC	Amb. -27 to 176ºF | -15 to 80ºC	Amb. 9 to 176ºF | 5 to 80ºC	Amb. -27 to 176ºF | -15 to 80ºC
Fluctuation	0.18ºF | 0.1ºC at 37ºC in Flask
Variation	0.90ºF | 0.5ºC at 37ºC in Flask
Refrigerator (Hp)	N/A	1 / 6 HBP	N/A	1 / 6 HBP
Shaking Motion	Orbital
Amplitude Size	0.75 In. | 19.1. mm
Speed Range	20 to 500 RPM
Shaking Accuracy	±1% of set speed (>100rpm) / ±1 (≤100rpm)
Timer	1 min. to 999 hr 59 min.
Max. Shaking Load	10 / 22.0 at 500 rpm15 / 33.1 at 400 rpm		14 / 30.9 at 500 rpm21 / 46.3 at 400 rpm
Volume	53 L | 1.9 Cu. Ft.		83 L | 2.9 Ct. Ft.
Platform Dimensions (W x D)	13.8×13.8 In. | 350×350 mm		17.7×17.7 In. | 450×450 mm
Interior Dimensions (W x D x H)	16.1×16.1×12.6 In. | 410×410×320 mm		20.1×20.1×12.6 In. | 510×510×320 mm
Exterior Dimensions (W x D x H)	17.3x30.9x20.1 In. | 440x785x510 mm		21.3x35x20.1 In. | 540x 890 x510 mm
Net Weight	143.3 lb | 143.3 kg	160.9 lb | 73 kg	178.6 lb | 81 kg	198.4 lb | 90 kg
Electrical Requirements	(120V) 60Hz, 7.5A	(120V) 60Hz, 10.1A	(120V) 60Hz, 7.5A	(120V) 60Hz, 10.1A

 

Rocker Tape Sheets

Secure, stabilize, and streamline your lab mixing workflows.

Rocker Tape Sheets provide a fast, reliable way to stabilize tubes, flasks, bottles, and other containers on rockers, shakers, incubators, and nutators, without the hassle of clamps or hardware. These high-performance adhesive sheets hold vessels firmly in place, allowing smooth mixing at speeds up to 300 rpm and beyond. Designed for repeated use, Rocker Tape Sheets maintain grip integrity based on load capacity and vessel quantity, making them a cost-effective, time-saving alternative for busy laboratory environments.

Compatible with most common lab solvents and engineered for dependable adhesion, these reusable sheets help ensure consistent mixing, reduced workflow interruptions, and safer operation. Ideal for microbiology, molecular biology, and general lab applications.

• 12 x 12 In. Sheets
• 3 Sheets per pack

*RPM limits may vary by vessel type and contact area. For optimal performance, test loads are recommended.   

Proudly made in the USA! Click here for more made in America products! 

Capp Rondo Plate Shaker

Specifications
 

Speed Setting	300 to 1800 rpm
Digital Display	Yes
Shaking Radius	1 mm
Motor Type	Brushless DC
Inbuilt Counter Balance	Yes
Power Supply	Universal (90 to 230V, 50/60 Hz)
Dimensions (W x D x H)	5 x 3.35 x 3.39 In. | 127 x 85 x 86 mm
Weight	3 lb | 1.36 kg
Accessories	Replaceable clamps to use different types of standard microplates
Warranty	2 Years

 

The Belly Dancer is designed for staining and blotting gels. It features an undulating motion that is designed to provide optimal movement for multiple staining and washings involved in gel and blotting techniques. The adjustable speed and platform pitch angle controls provide a wide range of agitation conditions from gentle to vigorous.

Features include:

• Gentle yet thorough mixing and washing action
• Incubator safe up to 37°C; not compatible with CO incubators
• Simple, durable trouble free construction
• No belts or pulleys
• Chemically resistant materials-stainless steel and anodized aluminum parts; high bake ester finish on case
• 30 cm X 30 cm platform for efficient benchtop and cold room operation
• Open sided platform to accommodate oversize containers
• Removable, washable on-skid platform mat
• Simple platform pitch control, from level motion to 8 ° pitch
• Light weight for easy mobility
• Variable speed control from° to 100 rpm; no cogging at slow speeds
• Max load of 20 lbs
• Extremely quiet operation
• High quality permanent magnet DC motor and control for long life and dependable performance
• 1 Year Warranty

Specifications

• Shake and incubate samples simultaneously
• Interchangeable platforms for tubes and plates
• Fine-tune Speed Control
• Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2mL to 15mL. Designed to meet the high-paced demands of today's lab, the exceptional performance of this product make it an essential part of your daily research.

Inquire about additional accessories:
1-4000-A, 1-4000-B, 1-4000-C, 1-4000-D, 1-4000-E, 1-4000-G, 1-4000-H, 1-4000-J

Orbit™ 1000 Digital Orbital Shaker

Four platform configurations allow the Orbit™ 1000 Digital Orbital Shaker to meet a variety of shaking and mixing applications. Single and double flat platforms hold trays, plates, and dishes. The double platform allows for expansion of the shaker capacity without increasing the footprint. The universal platform has spring-loaded bars that adjust to fit flasks, bottles, tube racks, and odd-shaped containers. Pre-drilled to hold Erlenmeyer clamps (clamps sold separately), the flask platform is ideal for mixing and growing cultures. Platforms are removable and interchangeable.

• Four available platform configurations
• Mid-range orbit for excellent culture aeration
• Compact construction for incubator use
• Solid and heavy duty

At the heart of the Orbit™ 1000 is a powerful brushless motor and counterbalanced shaker mechanism that provides smooth operation and years of trouble-free use. Speed and time are set with an analog knob, while the set and current values are displayed digitally. Speed is adjustable over a broad range to allow for applications such as staining and destaining gels, growth of bacterial cultures, and hybridization. The Orbit™ 1000 Digital Shaker is safe for use in temperature-controlled environments. Its small footprint and low profile make it ideal for use in incubators. Platforms are sold separately.

Specifications

Pro 30 Reciprocal Lab Shaker

The Pro 30 shaker features a left-to-right linear action to provide gentle to vigorous shaking. Four platform configurations make this model valuable for a variety of applications.

• Four stainless steel platform options
• Reciprocal motion for staining, washing blots, and general mixing
• Economical analog control with easy-turn knobs
• Safe for cold room and incubator use

Modern styling gives the Pro 30 a small footprint and an easy-access control panel. Speed and time are electronically controlled while their values are set with easy turn knobs. The four platform configurations include a large 30 x 30 cm flat platform with a non-slip rubber mat to hold sample containers in place. For added capacity, a stacked double platform is also available. The spring-loaded universal platform holds tube racks, bottles, and odd-shaped containers. Flasks up to 1L can be shaken off the flask clamp platform. Pre-drilled to hold a variety of different-sized clamps, the platform, and clamps are sold separately. Platforms are easily interchanged. The Pro 30 is safe for use in temperature-controlled environments.

Specifications

These items have been discontinued.
 Please see our Jeio Tech Benchtop Incubated Shakers page for more options! 

Shaking features

• Select between orbital or reciprocating action.
  
• Speed range: 10 to 300 rpm.
  
• Programmable shaking motion.
  
• Run time: 10 sec to 999 hr 59 min 59 sec.
  
• Forward & Backward, Pause: 10 sec to 59 min 59 sec
  
• Maximum orbit size: 40mm dia. (1.6❠dia.)
  

  Operating features

• +5°C above room temperature to 60°C for SI-300, 600
  
• 15°C to 60°C for SI-300R, 600R
  
• Microprocess PID control/ Auto-tuning/ Calibration.
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF.
  
• Over-temperature limiter/ Door opening alarm.
  
• Digital LED display for temperature (0.1°C resolution), speed, and shaking motions.
  
• Preset 3 most commonly used temperature settings.
  
• 9 step temperature and up to 200 cycles of repetition programmable for each profile.
  
• Adjustable 3 step fan speed.
  
• RS-232 interface available.
  

  Constructional features

• Brushless DC motor for long maintenance-free use.
  
• High-velocity fans ensure rapid thermal recovery and excellent variation. 
  
• Gas spring door and lid guards against sudden closures.
  
• Acryl lid and inner lamp functions allow observation of flask contents. 
  
• Attached fluorescent lamp offered bright observation in a chamber. 
  
• Use CFC-free refrigerant (for SI-300R, 600R)

Specifications