• Powder turns red when it comes in contact with acid 
• Amphomag® turns blue on contact with a base
• Safely neutralized chemical spills turn green/yellow 

Amphomag® efficiently handles all your spill control needs due to its unique ability to neutralize acids and bases. Amphomag® contains an innovative multi-range pH indicator that further simplifies spill response. When applied to the spill, Amphomagâs® color turns to red for acids and blue for bases. As Amphomag® neutralizes the spill, the color gradually changes to yellow or green. Free liquids in the released materials can easily be controlled and the neutralized material can typically be landfilled. For instance, sulfuric acid is safely rendered to harmless Epson Salt after neutralization.

Some common spill clean up instructions:

How to Clean-Up a Formaldehyde Spill

Formaldehyde is a common chemical used in a variety of products. It can cause respiratory irritation if inhaled, such as coughing, wheezing, and chest pains, and can affect people with asthma, allergies, or other breathing issues more acutely. If formaldehyde comes in contact with the skin, it can cause irritations like dermatitis or even burns. People with frequent exposure to formaldehyde, like some lab techs, become more sensitive to these negative effects. 

If you encounter a formaldehyde spill, first check to see if any has gotten onto you or anyone else around you. Thoroughly wash any formaldehyde off skin with soapy water. Then proceed to clean up the spill using the following directions.

Step 1: Supplies

• Mask
• Goggles
• Gloves
• Broom
• Plastic Dustpan
• Amphomag®

Step 2: Clean Up

1. Ventilate the area by opening any windows and doors or using a fan.

2. Put on protective clothing and gear if available before getting near to the spill.

3. Pour an ample amount of Amphomag® onto the formaldehyde.

Continue to slowly add Amphomag® until it completely absorbs the spill, reducing the harmful vapors and smell in the area.

Step 3: Disposal

The formaldehyde spill is now ready to be disposed of in accordance to your local and state regulations. Use a broom and plastic dust pan to sweep up the Amphomag® and dispose.

How to Clean Up a Hydrochloric Acid Spill

Use extreme care in handling this extremely corrosive, poisonous acid, which can cause severe damage to all body tissues. If a small amount of the acid is spilled, it should immediately be contained and neutralized to prevent harm to anyone or damage to whatever it was spilled on.

When using hydrochloric acid, always wear protective clothing and gear, such as eye goggles and gloves.

Your Chemical Spill Response

• Use quickly and safely to treat spills
• No dangerous side effects
• No dangerous gas, heating, or splashing

Amphomag® Beats the Competition

Compared to other spill clean-up products, Amphomag® is a one-stop hazardous spill neutralizer. Some spill absorbents, such as OIL-DRI, cannot absorb hydrochloric acid. Amphomag® can, with its unique pH indicator to identify and neutralize most hazardous spills.  
Most chemical spill response steps for laboratories need at least 5 steps in their instructions for use before you can apply a neutralizing agent. Even then, you have to find the right neutralizing agent.

Contain and neutralize any spill quicker with Amphomag® â it is the right product for chemical spills.

Step 2: Clean Up

Follow these 3 easy steps to cleaning up a hydrochloric acid spill using Amphomag®.

1. Pour Amphomag® slowly and directly onto the hydrochloric acid spill to contain and neutralize.
2. The Amphomag® will initially turn reddish/pink to indicate that it is an acid and when fully neutralized will turn to a yellow/green color.
3. If there is any hydrochloric acid remaining anywhere, repeat step 2 until all hydrochloric acid is gone.

Step 3: Disposal

The contained and neutralized spill is now ready to be disposed of as a non-hazardous material.  Use a broom and plastic dust pan to sweep up the Amphomag®.

Recombinant proteins from MIDSCI are expressed in a Pichia Pastoris (yeast) system which provides many advantages for research. Excellent bio-activity at an exceptional value. IBI recombinant proteins are lyophilized and are shipped at room temperature.

ADVANTAGES

• Extensive line of animal (including mouse & rat) and human proteins.
• All proteins are expressed in a Yeast system providing many advantages.
• 100% of the protein purchased is active and usable.
• No endotoxins produced in a yeast system.
• Yeast expression promotes protein folding making product more like its native host.
• Post-translational modifications promote greater bio-activity.
• Proteins are expressed and purified without HIS-TAGS or any other TAGS.
• Proteins are lyophilized and shipped without a carrier protein.
• Excellent quality and value when compared to other products expressed in E. coli.

APPLICATIONS

• Basic immunology (human)
• Veterinary Immunology
• Vaccine Research
• Cell culture proliferation
• Species focused research for human diseases.

Recombinant proteins from MIDSCI are expressed in a Pichia Pastoris (yeast) system which provides many advantages for research. Excellent bio-activity at an exceptional value. IBI recombinant proteins are lyophilized and are shipped at room temperature.

ADVANTAGES

• Extensive line of animal (including mouse & rat) and human proteins.
• All proteins are expressed in a Yeast system providing many advantages.
• 100% of the protein purchased is active and usable.
• No endotoxins produced in a yeast system.
• Yeast expression promotes protein folding making product more like its native host.
• Post-translational modifications promote greater bio-activity.
• Proteins are expressed and purified without HIS-TAGS or any other TAGS.
• Proteins are lyophilized and shipped without a carrier protein.
• Excellent quality and value when compared to other products expressed in E. coli.

APPLICATIONS

• Basic immunology (human)
• Veterinary Immunology
• Vaccine Research
• Cell culture proliferation
• Species focused research for human diseases.

Recombinant proteins from MIDSCI are expressed in a Pichia Pastoris (yeast) system which provides many advantages for research. Excellent bio-activity at an exceptional value. IBI recombinant proteins are lyophilized and are shipped at room temperature.

ADVANTAGES

• Extensive line of animal (including mouse & rat) and human proteins.
• All proteins are expressed in a Yeast system providing many advantages.
• 100% of the protein purchased is active and usable.
• No endotoxins produced in a yeast system.
• Yeast expression promotes protein folding making product more like its native host.
• Post-translational modifications promote greater bio-activity.
• Proteins are expressed and purified without HIS-TAGS or any other TAGS.
• Proteins are lyophilized and shipped without a carrier protein.
• Excellent quality and value when compared to other products expressed in E. coli.

APPLICATIONS

• Basic immunology (human)
• Veterinary Immunology
• Vaccine Research
• Cell culture proliferation
• Species focused research for human diseases.

REPLACEMENT PD COLUMNS AND COLLECTION TUBES -100 PACK

• For use with leftover reagents from IBI Plasmid Kits or competitive products
• Sample Size: 1 -4 mL bacterial culture
• Elution Volume: 50 to 100 µL
• Binding Capacity: Up to 30 µg

The Replacement Mini Plasmid Columns and Collection Tubes are for use with leftover reagents from IBI Mini Plasmid Kits including the following item numbers: IB47101, IB47102, IB47170, IB47171, and IB47172.

The columns and collection tubes can also be used with comparable, competitive Mini Plasmid Kit reagents that utilize a bind, wash, and elute method. However, you must observe the sample size, binding capacity, and elution volume for the replacement column stated in the specifications.

SPECIFICATIONS

Sample Size: 1 - 4 mL bacterial culture
Format: Spin column or vacuum manifold
Expected yield: 20 -30 µg for high copy and 3 -10 µg for low copy.
Elution volume: 50 µL to 100 µL
Operation time: 15 minutes
Purified plasmid DNA is ready for use in ligation, PCR, restriction enzyme digestion, and sequencing reactions.

REPLACEMENT DF COLUMNS AND COLLECTION TUBES - 100 PACK

• For use with leftover reagents from IBI PCR/Gel Extraction Kits or competitive products
• Sample Size: 300 mg agarose gel/100 µL PCR product
• Elution Volume: 20 to 50 µL
• Binding Capacity: Up to 10 µg

The Replacement DF Columns and Collection Tubes are for use with leftover reagents from IBI PCR/Gel Extraction Kits including the following item numbers: IB47020 and IB47030.

The replacement spin columns and collection tubes can also be used with comparable, competitive PCR/Gel Extraction Kit reagents that utilize a bind, wash, elute method. However, you must observe the sample size, binding capacity, and elution volume for the replacement column stated in the specifications.

SPECIFICATIONS

Sample Size: 300 mg of agarose gel or 100 µL of PCR product
Format: Spin column or vacuum manifold
Expected yield: 90% for Gel extraction and 95% for PCR Clean-up
Elution volume: 20 µL to 50 µL
Operation time: 20 minutes
Purified DNA is ready for use in Fluorescent or Radioactive sequencing, ligation, PCR, restriction enzyme digestion, and DNA labeling.

 MagBio HighPrep™ Plant DNA Plus Kit

, Beads

IBI 96-Well Vacuum Manifold

• Optimized for use with all of IBI 96-well kits
• The thin upper portion of the manifold is designed to reduce cross contamination
• Allows for the most effective extraction and purification of plasmid DNA, genomic DNA, viral DNA & RNA, total RNA and PCR products
• Materials: Manifold - made of anodized aluminum, Gasket - Ethylene propylene, O-Ring - Silicone
• Dimensions: 17x12x8cm
• Maximum vacuum: Approx. 71cm Hg (28 in Hg) (-13.7psi)

• Lyophilized components to ship without cold chain
• Highly specific detection profile and high priming efficiency
• Rapid detection of COVID-19 and does not detect other related coronavirus strains

Design of our COVID-19 was an intricate process using a dedicated team of expert bioinformaticians. Finding the right sequence is critical for not only assay specificity, but also sensitivity which can be inhibited by primer-dimer formation. These ultimately reduce the assay's ability to detect SARS-CoV-2 accurately. However, the right design will mitigate these risks and ensure a specific, sensitive and accurate test, as we have done.

Our surveillance program is in place to track the mutation of the virus. Our expert bioinformaticians analyze daily published virus sequences to ensure our test maintains a 100% detection profile. Each new mutation presents a risk to any COVID-19 kit detection and false negatives without surveillance programs in place. As of the 17th July 2020 our COVID-19 test has a 100% detection profile with the 42,655 full length, good quality SARS-CoV-2 sequences published on the GISAID-EpiCoV database.

Ensuring your COVID-19 test is stable during transit and storage is vital to prevent reagent degradation. Within our COVID-19 genesig® Real Time PCR assay we provide oasig components that are provided freeze dried which stabilizes the active components. This enables the reagents to be shipped at ambient temperature. This simplifies the logistics of shipping and is cost effective. If you're in a sophisticated laboratory or a mobile field hospital we can supply complete qPCR packages to your door quickly and cheaply via standard shipping methods without the need for dry ice or a cold chain of any sort.

The COVID-19 genesig® Real Time PCR assay was granted Emergency Use Authorization Only by the United States Food and Drug Administration (FDA).

MagBio MagQuant™ Plus DNA V2

, Beads

For any singular Distributor customer order/sale price of over $5,000 there will be no return allowed. For any order of $0-$4,999 Distributor may cancel/return any or all Products with a 15% restocking fee within 30 days after delivery of products to the customer by Distributor. After 30 days from receipt of the product from the customer, there will be no return allowed.

VitroINK® Mixing Kit – Complete Pack
 
Mix VitroINK® bioink with cells at 3:1 and 10:1 ratios. Full mixing kit with Dispenser and single-use components.

Mixing cells with the bioink is a critical step for 3D bioprinting. Because of the differences in viscosity of the cell suspension and bioink, the traditional manual mixing methods create a lot of air bubbles and non-uniform mixture which leads to the unstable printed structure, difficulty for cell observation and affect cell viability.

The VitroINK® Mixing Kit was designed to provide a robust mixing of the bioink and cells. Cells can be prepared with VitroINK® for a 3:1 mixing ratio using the 3 mL syringe or a 10:1 mixing ratio using the 1 mL syringe. To prepare the bioprinter cartridge, the VitroINK® and cell suspension are placed in the mixer and is dispensed through the connector and mixing head. Wait 10-20 minutes for the mixture to stabilized and the cartridge is ready for printing. There is no UV, no temperature/pH curing, or chemical cross-linking for the VitroINK® system. Adding cell culture medium to cover the printed structure can further stabilize and support cell growth. The bioprinted cells are ready for incubation.

The syringe, connector and mixing head are disposable for one-time use. Order the sterilized replacement mixing kit components to ensure the robust results for every single mixing.

Kit Contents and Specifications

• Disposable mixing kit components for VitroINK bioink:
• (1) Dispenser
• (1) 1 mL syringe
• (1) 3 mL syringe
• (1) connector and tubing
• (1) mixing head
• Sterile
• Use for 3:1 or 10:1 mixing ratio
• Ships room temperature. Store at room temperature.