Need Cold Storage in a Hurry?

MIDSCI™ Delivers Fast with ABS | American BioTech Supply!

5-8 Days Shipping on Fast Track Freezers & Refrigerators

Check out the Laboratory FastTrack | Pharmacy FastTrack flyers for full details.

  

Items are subject to change without notice. Fast delivery options may end at any time and are dependent on stock availability and location. 

While we strive to ensure the accuracy of all product descriptions and shipping timelines,

delivery times may vary based on factors such as order volume and shipping carrier performance. 

MIDSCI™ and ABS|American BioTech Supply reserve the right to modify or discontinue promotions at their discretion.

All terms and conditions apply.

4.6 Cu. Ft. Built-In Pharmacy Undercounter Refrigerator

Need Cold Storage in a Hurry?

MIDSCI™ Delivers Fast with ABS | American BioTech Supply!

5-8 Days Shipping on Fast Track Freezers & Refrigerators

Check out the Laboratory FastTrack | Pharmacy FastTrack flyers for full details.

  

Items are subject to change without notice. Fast delivery options may end at any time and are dependent on stock availability and location. 

While we strive to ensure the accuracy of all product descriptions and shipping timelines,

delivery times may vary based on factors such as order volume and shipping carrier performance. 

MIDSCI™ and ABS|American BioTech Supply reserve the right to modify or discontinue promotions at their discretion.

All terms and conditions apply.

Standard Glass Door Laboratory Refrigerator

2026 St. Patrick's Day Promo!

 

For a limited time, enjoy OVER $3,000 OFF the PR1MA™ TC9639 Thermal Cycler (BSTC-96)!

 

WAS $6,534.55 | NOW $3,500.00
Use Promo Code: SHAMROCK26

Click here for more St. Paddy’s Day Deals or see flyer for more details.

 

Free offers require purchase of designated item at listed price.

Offer is valid until 4/6/2026 or while supplies last. Not valid on previous purchases.

Special price applies only to item specified. Valid in the USA only. Use promo code SHAMROCK26.
All standard terms and conditions apply.

PR1MA™ TC9639 Gradient Thermal Cycler

The PR1MA™ TC9639 Thermal Cycler provides consistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 pre-installed programs make it easier than ever to get up and running.

The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. The heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature.

With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The PR1MA™ TC9639 has the flexibility to accept 96 × 0.2 mL tubes, a 96-well plate, 0.2 mL strips or 39 x 0.5 mL tubes all in the same sample block. For protocol optimization, a gradient can be set up across the block. An optional in-situ adapter allows for the incubation of slides. Additionally, the unit may be purchased with a 384-well sample block.

Compatible with PR1MA™ and Accuris™ PCR reagents. For research use only.

A large, full-color touchscreen serves as the operations center where all functions are accessed. From the “Home” screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access.

The program wizard guides users through quickly setting up a protocol on a single screen. Once entered, programs are shown graphically and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password-protected) folders, or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders.

Main Attributes

• Gradient capabilities- ideal for protocol optimization
• Intuitive touchscreen control- Works even when wearing gloves!
• Upgraded software- Even easier to use than before!
• No need for interchangeable blocks- multi-format accepts:
• 0.2 mL tubes or strips (96)
• 0.5 mL tubes (39)
• 96-well PCR plate

LabValues 2026 Promo!

For a limited time, enjoy special pricing on the
MultiGene™ OptiMax Gradient Thermal Cycler (TC9610)!

See flyer for more details.

Offer cannot be combined with other discounts or institutional pricing.
Offer not valid on previous purchases. Promo valid from 1/19/26 to 7/30/26 or while supplies last.

All terms and conditions apply.

MultiGene™ OptiMax Thermal Cycler  

This simple-to-program PCR thermal cycler unit is compact in design and built to perform. Programming is intuitive with the large display and multiple pre-programmed templates supplied with the unit.

The OptiMax comes with standard built-in 2-step, temperature optimization, touchdown, and time increment protocols that are easy to adjust to meet your cycling needs. You can select lid temperature or turn it off depending on your needs. The faster ramp rates allow more work to be done in a workday.
 

Additional Thermal Cycler Product Features:

• Unique Flexible Programming with FlexTemp™ technology
• Fast ramp rates 5°C heating / 3.5°C cooling
• Simple user interface
• No condensation after overnight cooling at 4°C
• 3-Year Warranty 

Distinct Heat Optimization

The MultiGene™ OptiMax employs a new protocol optimization process improving on older gradient features. This “Better than Gradient” capability allows users to select up to 6 distinct annealing temperatures to be run simultaneously. This is ideal for method optimization as well as applications like genotyping.

The OptiMax utilizes FlexTemp™ technology that effectively separates the 96-well plate into 6 – (4 x 4) temperature regions that allow you to pick the temperatures you want to test against. These regions are easily identified by the blue and black squares visible on the microplate platen. Instead of having the thermal cycler choose temperatures for you, you can choose any temperatures you want within a 24°C range.

The MultiGene™ OptiMax has a heating rate of 5°C /sec and a cooling rate of 3.5°C/sec. We have minimized overshooting and undershooting so that your reactions only see the temperatures they are supposed to see. This also leads to faster runs time.

Intuitive User Interface

The MultiGene™ OptiMax utilizes an intuitive user interface. This user interface is friendly to the laboratory environment and consistent with what our customers previously enjoyed in our earlier models. It can be used with lab gloves even if wet. We have improved the ramping speed and eliminated overshooting and undershooting which contributes to longer run times.

Fully Adjustable Heated Lid

The OptiMax’s heated lid is fully adjustable to provide optimum pressure for use with a broad range of tubes and microplates. For optimum performance, the lid can also be programmed to hold different temperatures between 60° to 65°C and 100° to 115°C. The OptiMax lid prevents condensation and slides away and back from the user to provide full access to samples and reduce the risk of coming in contact with a hot surface.
 

2026 St. Patrick's Day Promo!

 

For a limited time, buy 1 PR1MA™ SmartGlow™ DNA Safe Stain (BE4500-PS, BE4500-LD)
and get 1 FREE (BE4500-PS-VF, BE4500-LD-VF)!

 

Add item at listed price and one “-VF” item to your cart for free product.
Use Promo Code: SHAMROCK26

Click here for more St. Paddy’s Day Deals or see flyer for more details.

 

Free offers require purchase of designated item at listed price.

Offer is valid until 4/6/2026 or while supplies last. Not valid on previous purchases.

Special price applies only to item specified. Valid in the USA only. Use promo code SHAMROCK26.
All standard terms and conditions apply.

PR1MA™ SmartGlow™ DNA Safe Stain

• Replaces hazardous Ethidium Bromide (EtBr)
• Better sensitivity than EtBr
• Detect as little as 0.1ng of DNA
• Two types available
• PS Pre Stain
• LD Loading Dye
• Excitation by UV light or blue light
• Compatible with Accuris SmartBlue™ Transilluminator
• Ships at ambient temperature (stored at 4°C)

PR1MA™ SmartStain™ PS (Pre-Stain) can be used as a direct replacement for Ethidium Bromide in agarose and polyacrylamide gel electrophoresis. The stain emits green fluorescence when bound to dsDNA or ssDNA and emits red fluorescence when bound to RNA. PR1MA™ SmartStain™ PS exhibits excitation peaks at 290 nm and 490 nm, allowing it to be used with UV and blue light.

Protocol:

• Prepare 100 mL of agarose or polyacrylamide solution.
• Add 5 uL of PR1MA™ SmartStain™ to the gel solution before pouring gels.
• For enhanced results, add PR1MA™ SmartStain™ PS to the running buffer at a ratio of 5 uL per 100 mL. Adding PR1MA™ SmartStain™ PS to the running buffer will result in increased sensitivity and better detection of small quantities of nucleic acid.
• After electrophoresis is complete, view the gel using a UV or blue light illuminator

Limited Time Promo!

 

For a limited time, enjoy special pricing on the Azure Cielo 6 qPCR System (AIQ060)!

 

WAS $34,850 | NOW $16,895

 

Package Includes: Azure Cielo 6 qPCR System, Comprehensive analysis software, and 18-month warranty.

 

See flyer for more details.

 

Promo is valid until 06/30/26 or while supplies last.
Offer cannot be combined with other discounts or institutional pricing.
All terms and conditions apply.

Azure Cielo™ qPCR Systems

The Azure Cielo™ Real-Time PCR system provide accuracy and sensitivity needed for research, with intuitive touch screen software.

• Flexibility:  Engineered for a wide variety of qPCR applications, with high sensitivity and wide dynamic range.
• Intelligent workflow: The user interface is a simple touch screen assay setup.  Protocols can be saved to make assay set up easy and reproducible.
• Reliability: Cielo's optics and thermal block are designed to deliver the same uniformity and reproducibility over at least 1,000 qPCR experiments, giving you confidence in the reliability of the instrument.
• Connectivity: An external PC is not required to run the instrument.
• Data Transfer: This can be performed via Ethernet, Wi-Fi or USB.

Operation - A standalone qPCR system with 10.3” touchscreen interface
Optics - 3 or 6 dye channel filters with LED based excitation for multiplexing
Speed - Fiber optic detection system scans 16 wells simultaneously
Durability - Tested reliability for over 1000 continuous runs
Connectivity - Easily export data via Wi-Fi, ethernet, USB or LAN
Capacity - 96-well format for semi-skirted or un-skirted plates and tubes
Thermal Performance - Marlow Peltier based block with 12 temperature gradient zones, ramp rates up to 6.0°C/sec
Chemistry - Supports reaction volumes between 10 µl–150 µl, open source chemistry, including FAST ~20 minute run-times
Sensitivity - Detect 2-fold differences in target quantities in singleplex reactions and up to 1 copy of amplified DNA, 10 logs of dynamic range

Competitor Q uses a single light source to excite all samples.

Differences in light path length lead to differences in excitation, which requires normalization. Though Competitor Q has said that they do not require normalization dyes, this is not reflected in the data as the data CV values for replicates is significantly higher.

Why doesn’t the Cielo™ require ROX dye?

 The Cielo does not require ROX dye because it uses in-well detection technology. The light path for excitation and reading emission are collimated directly into the well. As such, the light path length is always the same for each well, so there is no need to normalize for varying light path length. The data from the Cielo is consistently uniform and reproducible.

Specifications

*Other dyes/probes are possible depending on the system configuration.

Proudly made in the USA! Click here for more made in America products!

2026 Centrifuge Promo!

Z216-K Bundle Options (Z216-K-BND44 or Z216-K-CMB)

Z216-K-BND44 Bundle Includes:

One Z216 MK Refrigerated Centrifuge (Z216-MK), 115V

& One 44 Place Rotor (Z216-4420)

Z216-K-CMB Bundle Includes:

One Z216 MK Refrigerated Centrifuge (Z216-MK), 115V

& One COMBI-Rotor (Z216-2420S)

Add item # Z216-K-BND44 or Z216-K-CMB to your cart for a bundle discount.

Click here for more Benchmark Bundles

or see flyer for more details.

Free offer with purchase of designated items at listed price. Cannot be combined with other discounts or pricing.

Not valid on prior purchases. Special price applies only to the specified item; no substitutions.
Promo valid from 01/01/26 – 6/30/26. All terms and conditions apply.

Z216-MK High-Speed Refrigerated Microcentrifuge

• 9 rotor options with a capacity of up to 44 x 1.5/2.0 mL

• High speed, 15,000 rpm/21,631 x g

• Powerful refrigeration, room temp. to 4°C in <10 min

• Accepts tubes from 0.2 mL to 5 mL

• 5 Year Warranty

Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.

All common microtubes (0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0 mL centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy-to-use front panel can adjust accel/decel rates and change the end-of-run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5 mL dual-row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.

In the Z216-MK model a powerful, compressor-driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.

Specifications

Speed Range	200 to 15,000 rpm
Max. RCF	21,379 x g
Max. Capacity	44 x 1.5/2.0 mL
Temp. Range	-20°C to 40°C
Dimensions	11 x 21.6 x 11.4 in.
	27.9 x 54.9 x 29 cm.
Weight	77lbs (35kg)
Electrical	120V, 60Hz

Accessories & Parts

Item #	Description
Z216-2420S	COMBI-rotor™ w/ Quick-Seal™ Lid for 24 x 1.5/2.0 mL and 4 x PCR Strips (15,000 rpm/ 21,631 xg)
Z216-2420	Rotor, 24 x 1.5/2.0 mL w/ Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-2420H	Rotor, 24 x 1.5/2.0 mL w/ Hermetically Sealed Aluminum Lid (15,000 rpm/ 21,379 xg)
Z216-3020H	Rotor, 30 x 1.5/2.0 mL w/ Quick-Seal™ Lid (13,500 rpm/ 19,151 xg)
Z216-4420	Rotor, 44 x 1.5/2.0 mL w Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-24SC	Rotor, 24 x 1.8 mL Spin Column Kits w/ Quick-Seal™ Lid (13,500 rpm/ 17,317 xg)
Z216-3202	Rotor, 4 x PCR Strips (32 x 0.2 mL Tubes) (15,000 rpm/ 15,343 xg)
Z216-1205	Rotor, 12 x 5 mL Centrifuge Tubes (14,500 rpm/ 19,978 xg)
Z216-24HEM	Rotor, Hematocrit, 24 x Capillary (12,000 rpm/ 14,970 xg)

 
 

2026 St. Patrick's Day Promo!

 

For a limited time, enjoy $336 OFF the myGel InstaView™ System (E1201)!

 

WAS $1,135.94 | NOW $799.00
Use Promo Code: SHAMROCK26

Click here for more St. Paddy’s Day Deals or see flyer for more details.

 

Free offers require purchase of designated item at listed price.

Offer is valid until 4/6/2026 or while supplies last. Not valid on previous purchases.

Special price applies only to item specified. Valid in the USA only. Use promo code SHAMROCK26.
All standard terms and conditions apply.

myGel InstaView™ System | Complete System with Power Supply

• View DNA migration and separation as it happens
• Blue light illumination - won't damage DNA
• Capture high-resolution images without removing the gel from the tank

The myGel InstaView™ comes complete with everything needed to cast, run, and view mini electrophoresis gels, including an integrated power supply. One large (10.5 x 10 cm) or small (10.5 x 6 cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs, and leak-proof casting stand. The power supply connects directly to the gel tank – no more leads to contend with. The connection is guaranteed to be right, every time.

Output voltage can be adjusted to 35V, 50V, or 100V and run time can be set for up to 99 minutes. A magnetic interlock between the gel tank and the lid prevents current from running through the system when the lid is not properly in place.

Once the myGel InstaView™ System is set up, simply slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real-time. An array of blue LEDs emits bright blue light at a wavelength of 465 nm for optimal excitation of common green fluorescent stains such as SmartGlow™, SYBYR™ Green, and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands without any additional equipment or special glasses. When it’s time to document results, place the included gel imaging enclosure over top of the myGel InstaView, and use the camera app on any smartphone to capture high-resolution images without removing the gel from the tank.

Images are easily shared via email or text message or printed.
 

Specifications

InstaView™ Gel Tank

For labs that prefer to use a separate power supply, the InstaView™ Gel Tank is the perfect choice for running, viewing, and documenting electrophoretic separations. The InstaView™ Gel Tank accommodates one large (10.5 x 10 cm) or one small (10.5 x 6 cm) gel tray and is supplied with trays, combs, and a leak-proof casting stand. The gel tank lid includes attached power leads which prevent the unit from operating without the lid properly in place.

Any standard power supply can be connected, including the Accuris myVolt™ Mini and myVolt Touch. The InstaView™ Gel Tank is shaped to allow the mini-LED transilluminator (included) to slide underneath. Blue light, at a wavelength of 465 nm, provides excitation of common green fluorescent stains such as SmartGlow™, SYBR™ Green, and GelGreen. An orange filter is incorporated into the gel tank lid for visualizing the DNA in the gel box without any additional equipment or glasses. The transilluminator can be turned on at any time during a run to track progress and automatically shuts off after 5 minutes.

After electrophoresis, simply place the included imaging enclosure over the InstaView™ Gel Tank to capture high-resolution images with a smartphone. Images are easily printed or shared via email or text message.

Specifications
 

Safety	Physical interlock between lid and tank
Buffer Volume	230 mL
Gel Capacity	1-10.5 x 10 cm or 1-10.5 x 6 cm gels, 0.5 cm thick
Transilluminator	Blue LED, 465 nm
WxDxH (w/enclosure)	7.5 x 8.25 x 5 in /19 x 21 x 14 cm
Weight	1.65lb/0.75kg
Electrical	115V, 60Hz or 230V, 50Hz
Warranty	2-year

  

System & Accessories
 

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
  
• Advanced programming with auto-rotor recognition
• Optional high speed rotors, providing up to 24,000 xg
• Available with refrigeration
• 5 Year Warranty 

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique "Mid-Range" swing out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250 mL rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

• HIGH CAPACITY 4 x 750 mL swing out rotor, 68 x 15 mL or 28 x 50 mL
• Ideal for Tissue Culture applications
• Advanced programming with automatic rotor recognition
• Available with refrigeration

The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750 mL swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50 mL or 68 x 15 mL tubes.

Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.

Specifications