Operating features

• From +10°C above room temperature to 220°C
• Microprocess PID control / Auto-tuning/ Calibration
• Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF
• Over-temperature limiter / Door opening alarm
• Conveniently preset 3 most commonly used temperature settings without auto-tuning.
• Digital LED display (1°C resolution) with touch keypads
  

  Constructional features

• Circular fan assisted forced-air convection provides a high uniformed drying performance.
• Moderately sized, spacious, and an easy to grip circular door handle.
• Corrosion-resistant incoloy sheath heater and stainless steel chamber. 
• Two circular adjustable top slide vents helps to control inner air vapor circulation. (dia 38mm/ 1.5")
  
  

  Model OF-01E OF-11E OF-21E Chamber volume (L/cu ft) 52 / 1.8 100 / 3.5 150 / 5.3 Temperature Range (°C/°F) Amb. +10 to 220 / Amb. +18 to 428 Fluctuation1)(±°C/°F)at 100°C 0.4 / 0.72 Variation1)(±°C/°F)at 100°C 3.3 / 5.94 3.3 / 5.94 2.3 / 4.14 Dimension Interior dimensions (W x D x H) (mm/inch) 375x370x370 / 14.8x14.6x14.6 455x430x510 / 18.0x17.0x20 585x460x555 / 23.0x18.1x21.9 Exterior dimensions (W x D x H) (mm/inch) 530x535x737 / 20.9x21.1x29.0 610x595x877 / 24.0x23.4x34.5 740x625x922 / 29.1x24.6x36.3 Net weight(Kg/lbs) 36 / 79.4 47 / 103.6 59 / 130 Electrical Requirements (230V) 50/60Hz, 4.3A 50/60Hz, 6.0A 50/60Hz, 7.4A Cat. No. AAH14012K AAH14022K AAH14032K Electrical Requirements (120V) 50/60Hz, 6.8A 50/60Hz, 8.4A 50/60Hz, 10.1A Cat. No. AAH14016U AAH14026U AAH14036U

  1) Technical data (according to DIN 12880)

BENEFITS:

• Best Uniformity in Class
• Increased Volume of 5.9 cubic feet
• Hot Air Sterilization Cycle at 180°C minimizing the risk of contamination
• Maximum Saturation Without Condensation
• Stable pH-values thanks to drift-free CO2 IR sensor technology
• Easy cleaning thanks to seamless, deep-drawn inner chamber

MAIN FEATURES:

• Temperature range: room temperature plus 7°C to 50°C
• Humidity range: up to 95 % RH
• Auto-sterilization with hot air at 180°C
• Humidification system with condensation protection
• CO2 gas-mixing jet with Venturi effect
• CO2 sensor with infrared technology
• Display with 3-digit, 7-segment LEDs
• Door hinged right or left
• Tightly-sealed inner door made of tempered safety glass
• Seamless, deep-drawn inner stainless steel chamber
• 3 perforated stainless steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and audible alarms
• Zero-voltage alarm contact

TECHNICAL DATA:

* All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series.

Grant Bio Personal Bioreactors

Grant-bio personal bioreactors provide a "Reverse-Spin" type of agitation and logging of microbial growth in 50 mL tubes in real-time.

RTS-1-US including TubeSpin® Bioreactor 50, TPP®, 20 pcs.
RTS-1C-US with cooling, including TubeSpin® Bioreactor 50, TPP®, 20 pcs.

Features

• Innovative mixing due to reverse spinning of the sample around its own axis
• Due to innovative mixing technology, it is possible to measure the optical density of the probe in real time
• Software has been developed to store, display, and analyze the data in real-time
• Compact device with a low profile and small footprint for personal application
• Temperature control allows use as an incubator, e.g. for cell growth
• Active cooling and temperature profiling via software [RTS-1C-US only]
• The ability to change parameters such as temperature, RPM, and "Reverse-Spin" frequency, allows the achievement of consistency and reproducibility of results
• Programmable Cycling/profiling of cultivation parameters such as temperature, RPM, "Reverse-Spin" frequency
• The ability to remotely monitor the process of cultivation while at home or using a mobile phone

Software features

• Real-Time cell growth logging
• 3D graphical representation of OD or growth rate over time over unit
• Pause option
• Save/Load option
• Report option: PDF and Excel
• Connect up to 12 units simultaneously to 1 computer
• Remote monitoring option (requires internet connection)
• Cycling/Profiling options
• User calibration options for any microorganism

Applications

• Bacterial cultivation with real-time growth kinetics
• Strain screening
• Temperature stress and fluctuation experiments
• Media screening and optimization
• Synthetic and systems biology
• Inhibition and toxicity tests

Operating features

Operating features for BW-B (Analog models)

• +7°C above room temperature to 100°C
  
• On /Off temperature control
  
• Over-temperature limiter, alarm indicator.
  
• Analog dialed indication with fine adjustment
• 18 months standard; 6 addiitionl months upon receipt of warranty card

  Constructional features

• Low-profile baths with front slope-panel controls provide an easier 
  access and makes it safer.
  
• Additional inner circulating system by equipped agitator
  (BW-H series)
  
• Dual bath models features individually programmable temperature 
  controller chambers. (BW-H series)
  
• Various accessories gable and flat covers, test tube and spring wire 
  racks, half-shelf adjusters etc. (optional)
  * All accessories for dual baths (BW-H series) refer to BW-H/ B series 
  accessories options per each bath size. 
  (Ex. Each of gable covers for BW-0510H may be used to cover BW-05H / B and 
  the other cover for BW-10H / B)
  
  

  Model BW-05B BW-10B BW-20B Bath wolume (L/cu ft) 3.5 / 0.1 11.5 / 0.4 20.0 / 0.7 Working Temperature Range (°C/°F) Amb. +7 to 100 / Amb. +12.6 to 212 Temperature Stability(±°C/°F) 0.5 / 0.9 Dimensions Bath opening / depth  (WxL, D) (mm/inch) 240x136/ 115mm 300x240/ 165mm 498x300/ 165mm (9.4x5.4/ 4.5â) (11.8x9.5/ 6.5â) (19.6x11.8/ 6.5â) Overall/  with gabel cover  (WxLxH, H) (mm/inch) 303x242x245/  380mm 357x330x290/  425mm 564x392x290/ 425mm (11.9x9.5x9.6/ 15.0â) (14.1x13.0x11.4/ 16.7â) (22.2x15.4x11.4/ 16.7â) Net weight (kg/lbs) 6.5kg (14.3lb) 10.0kg (22.0lb) 18.5kg (40.8lb) Electrical Requirements  (230V) 60Hz, 3.0A 50Hz, 3.0A 60Hz, 4.3A 50Hz, 4.3A 60Hz, 8.7A 50Hz, 8.7A Cat. No. AAH46011K AAH46012K AAH46021K AAH46022K AAH46031K AAH46032K Electrical Requirements  (120V) 60Hz, 5.8A 60Hz, 8.3A 60Hz, 8.3A Cat. No. AAH46013U AAH46023U AAH46033U

  1) Technical data (according to DIN 12876)

• Easy-to-Clean Stainless Steel Tank
• Air Jacket Heating Eliminates Hot Spots
• Recessed Heating Element Prevents Burnout
• UL Listed
• 2 year limited warranty, excludes tank

SHEL LAB high-performance water baths are accurate, easy to use, safe and durable. The digital set / digital read P.I.D. temperature controller maximizes rapid heat-up without temperature overshoot. A microprocessor achieves precise temperature control regardless of how the unit is loaded. Calibration is performed directly from the front panel.
 

This durable and dependable water bath comes with a variety of safety and convenience features. It has a unique lid design that allows condensation to drain back into the tank without spilling onto the work area. We have also incorporated a gasket around the water bath tank to prevent water from dripping onto the controls. A warm air jacketed design radiates heat to the sides and bottom of the tank, eliminating hot spots. The unit has a non-contact, recessed heating element that will prevent burnouts if the water level is too low.

The water bath tank is constructed of stainless steel and does not have seams that could leak. The radius corners of the tank make cleaning easy. The unit's housings have a high quality textured powder coat finish. This electrostatically applied finish not only eliminates rust and chipping but is resistant to nicks, scratches and corrosives.

SHEL LAB Digital Water Baths are durable, dependable and are available in four sizes (2, 7, 15, and 23 L), with a variety of safety and convenience features.

Economy Digital Dual Heating Baths
 
Operational Features of BW-H water baths

• + 5° C above room temperature to 100° C
• Microprocessor PID temperature control
• Over-temperature protection with alarm
• Digital LED displays of temperature readouts and set temperature values to .1° C or 1° C

Constructional Features of BW-H water baths:

• Low-profile design with sloped control panel for easier access and better safety
• Additional inner circulation system using patented agitator
• Individually programmable and temperature controllable dual reservoirs
• Various accessories available to customize your needs-including gable and flat covers, test tube racks, spring wire racks, and half-shelf adjusters

Lab Armor | Peltier Bead Bath 7 L and 14 L

• Acrylic Viewport to Monitor Samples without Opening Lid
• Sealing Lid for Better Temperature Stability
• Removable Aluminum Bead Baskets for Easy Handling
• Peltier Thermoelectric Cooler-Heater (TEC-H) Device
• Control Panel with Digital Temp Display
• Robust All Steel Construction
• 2 Year Limited Warranty

Lab Armor revolutionizes the scientific bath industry with the Peltier Bead Bath!

Utilizing Peltier Thermoelectric Cooler-Heater (TEC-H) technology, the Peltier Bead Bath is an all-in-one unit that efficiently controls the temperature in chilled and heated applications. The air jacketed design is exclusive to the Lab Armor Peltier Bead Bath, and it is the only bead bath on the market with both cooling and heating capabilities.

The Peltier Bead Bath works with Beads to deliver exceptional temperature uniformity and securely hold lab vessels of various sizes in place. Samples may be conveniently transported using the removable Lab Armor Peltier Bead Baskets. The Bead Bath helps prevent the risk of sample contamination by removing water from many laboratory processes. These design

*Bath empty with no beads loaded.
**Bath filled with beads.

Aspire Aspirator

• Compact Design
• Built-in Vacuum Pump
• Adjustable Vacuum Pressure
• Vacuum Gauge
• Safe and Precise Aspiration

The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of laboratory aspirating applications, including removal of media from tissue culture vessels or plates, and supernatants. An ergonomic, hand held aspirating device is included, and holds standard 200 to 300ul disposable pipette tips.

Comes complete with:

• Base with internal vacuum pump
• 2 Liter, Polycarbonate Collection Bottle (autoclavable and break resistant)
• Antibacterial / Hydrophobic Filter
• Silicone Tubing
• Handheld Vacuum Controller
• 2 Pipette cone adapters (for 200 ul pipette tips and 40mm stainless steel)

The collection bottle incorporates a reliable Overflow Protection Valve that closes off the tube to the vacuum in the event of a full bottle. In addition, the replaceable in-line filter protects the vacuum pump from contaminants and any moisture that comes through the bottle. Graduations on the collection bottle indicate the amount of fluid collected and when it's ready to be emptied. The Handheld Vacuum Pipette has an ergonomic design that's comfortable in the hand during prolonged use.  Pressing the button applies the vacuum. The pipette accepts Pasteur pipettes, serological pipettes, and also comes with 2 accessory pipette cones. One cone is designed to accommodate 200/300ul pipette tips, the other has a thin, stainless steel capillary for fine control aspirating. 
 

Specifications 

The Wheaton OmniSpense ELITE and UniSpense PRO are intelligent peristaltic pumps for all your dispensing needs. Whether you are making sterile liquid trasnfers to and from containers or filling vials or titer plates, these pumps will simplify and accelerate your laboratory output.

The systems are operated via a large 5" backlit liquid crystal display and chemical resistant keypad. Options are displayed as large icons for quick operation and easy recognition in national and international markets. The pumps also feature a small footprint and an angled polarized display perfect for use under a fume hood or biological safety cabinet.

Calibration of the units is simplified to a single intuitive calibration screen that walks the user through the process stepwise. This eliminates scrolling through menus and complicated instruction manuals.

The OmniSpense ELITE and UniSpense PRO can be specifically outfitted and programmed for your process. These programs can be saved and recalled at a later time for a quick application turnaround. Both pumps support tubing with different specificaitons and the OmniSpense ELITE can use stacked pump heads or microcassette heads for multiple small volume dosing.

The UniSpense PRO is a dual-speed dedicated dispensing pump designed to accommodate single of multiple filling applications. The OmniSpense ELITE is a variable speed dispensing pump with built-in FLOW mode. The FLOW mode allows for real time tracking of a single liquid transfer. The pump can be paused and restarted for more involved processes.

The OmniSpense ELITE and UniSpense PRO help menus are English, Chinese, French, Japanese, Korean and Spanish language enabled. These menus ensure the icon driven display is easily understood by national and international laboratories.

The OmniSpense ELITE and UniSpense PRO are ideal for any laboratory or clinical setting where accurate and precise dispensing is important.

Features of Wheaton Pumps include:

• Icon Driven User Interface
• Trouble-Free Calibration
• Ultra-High Precision Stepper Motor
• Compact Design
• User-Friendly Operation in Six Languages
• Complies with Industry standards including: UL, CSA, CE, WEEE & RoHS Compliant

Specifications

• For use in the hood, outside the hood, or on the bench
• Great for aspiration or filtration
• Control knob for infinite vacuum setting (-300 mbar to -600 mbar)
• Overflow protection of pump and electronics by a hydrophobic filter at the pump inlet
• Eliminates contamination of lab vacuum lines
• All parts in contact with fluids are autoclavable
• Silent operation
• Excellent for work involving pathogens or biohazardous fluids
• When used with VACUBOY hand operator and attachments, offers unparalleled speed and flexibility when aspirating from any type of vessel from flasks to 96-well plates

The VACUSAFE comfort is a self-contained, multifunctional vacuum aspiration system that offers many benefits over "homemade" systems connected directly to a lab vacuum line or faucet. When used in conjunction with the VACUBOY hand operator, the VACUSAFE comfort provides unparalleled performance, flexibility, and safety when aspirating media, biological fluids, or chemical solutions.

VACUBOY Benefits and Features:

• Time-savings and flexibility particularly when aspirating from multi-well plates
• Dual vacuum speed control either with push button on top, or rear turn setting
• Single, 4-channel, and 8-channel adapters available
• Adapters include disposable pipette tips, Pasteur and serological pipettes, or fixed stainless steel pins

The VACUBOY hand operator is designed to accommodate a variety of aspiration adapters including stainless steel pins, disposable tips, and Pasteur or serological pipettes. Each adapter is designed to perfectly match the physical dimensions of typical laboratory vessels including flasks, bottles, and multi-well plates. It can be used in conjunction with the VACUSAFE aspiration system or a stand-alone upgrade to your current system.

VACUBOY Attachment Options:

• Single stainless steel aspirator (40mm, 150mm, or 280mm)
• 4-channel stainless steel aspirator
• 8-channel stainless steel aspirator
• Single-channel adapter for pipette tip, (w/ or w/o ejector)
• 8-channel adapter for pipette tips, with ejector
• Rubber adapter for Pasteur and serological pipettes

Hermle Z167-M High Speed Microcentrifuge

• Microprocessor with large LCD display
• Electromagnetic lid lock
• Quick access to samples
• Active imbalance identification and cut-off
• Air Cooling System
• Quick Acceleration and Deceleration
• within 14 respectively 16 seconds
• Noise level < 57 dBA, at max. speed
• Easy removal of rotor, without tools
• Manufactured in accordance to International
• Safety Regulations, i.e. IEC 61010