Hoefer® Combs for SUB6 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB6 Submarine Gel Electrophoresis Systems

Proudly made in the USA! Click here for more made in America products!

Hoefer® Standard and Preparative Combs for Vertical Systems

Combs are precision machined from Teflon®, which is highly resistant to acids, bases, and all commonly used buffer systems. An important benefit of Teflon® combs, compared to other types, is that they are easily removed while maintaining gel integrity. They are lightweight and virtually unbreakable when used with reasonable care. Some combs have microtiter spacing for use with multi-channel pipettes.

• Standard Combs come attached to a standard back, which produces maximum well depths of 25 mm, except for the 28-well combs, which produce well depths of 15 mm. 15-well Standard Combs have microtiter spacing for use with multichannel pipettes.
• Preparative Combs have adjustable comb backs (10, 15, and 25 mm depth) and form 1 large preparative well plus 1 or 2 small reference wells.

Hoefer® Combs for HE33 Mini Horizontal Agarose Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• All combs require HE31-BK comb back ordered separately
• Preparative combs have 1 preparative well and 2 reference wells
• Sample volume listed is for a 5 mm deep well
• For use with HE33 Mini Horizontal Agarose Systems

Proudly made in the USA! Click here for more made in America products!

Hoefer® Standard and Preparative Combs for Mini Vertical Systems

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems.

Precision machined from Teflon®, which is highly resistant to acids, bases, and all commonly used buffer systems. An important benefit of Teflon® combs, compared to other types, is that they are easily removed while maintaining gel integrity. They are lightweight and virtually unbreakable when used with reasonable care. Some combs have microtiter spacing for use with multi-channel pipettes. (See Specifications.)

Standard Combs come attached to a standard back, which produces maximum well depths of 25 mm, except for the 28-well combs, which produce well depths of 15 mm.

• 9- and 18-well Standard Combs have microtiter spacing for use with multichannel pipettes.
• Preparative Combs have adjustable comb backs (10, 15, and 25 mm depth) and form 1 large preparative well plus 1 or 2 small reference wells.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Combs for SUB25 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB25 Submarine Gel Electrophoresis Systems

Proudly made in the USA! Click here for more made in America products!

Lab Armor® Bead Bath

Bead Baths from Lab Armor® are designed with the user in mind and are optimized to work with Lab Armor® Bath Beads. Bead Bath performs all the essentials, including warming, thawing, incubating, chilling and does so while maintaining a constant temperature just like a water bath. These baths deliver exceptional temperature uniformity up to 80°C. The baths are available in 6 L, 14 L, and 20 L sizes, with and without beads included. 

• Uniform Temperatures
• With Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is an amazing ±5 °C at 37 °C and ± 1 °C at 65 °C. Since Bead Bath won't boil off like water, or pose danger of combustion like oil, it is ideal for most applications from 37°C to 400 °C.
• Fast Start
• Bead Bath gets up and running faster and you never need to turn it off. There is nothing to evaporate. Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm up delays, so you can make quick adjustments.
• Stays Organized
• Unlike water baths that require racks, floats and bottleneck weights, Bead Bath naturally holds things in place without accessories. The types and kinds of vessels that can be used with the Bead Bath aren't limited to water-tight containers. So you can safely incubate multiwall plates and petri dishes-or thaw samples without fear of water wicking under the lids. And vessels can be set into the beads at any angle for better thermal optimization.
• Low Maintenance
• Water baths must be routinely monitored, cleaned and maintained. While it is a good idea to keep an eye on Bead Bath, it rarely needs attention. A bi-weekly or monthly spritz of a biodegradable disinfectant is usually sufficient.

Specifications

Hoefer® Standard Format Glass Plates for Vertical Systems

Standard format glass plates are for SE660, SE600X Chroma, SE600, SE640, SE410, and SE400 Vertical Gel Electrophoresis Units.

Run as many as four 0.75, 1.0, or 1.5 mm thick gels on SE600 Series units and two gels on the SE400 Series at one time under identical conditions using the double gel capacity Divider Plates. Insert a divider plate between the glass plates that make up a single gel sandwich. Place spacers on each side of the divider plate to form two gel cavities for pouring gels. This two gel “club sandwich” fits into the same casting stand and seals perfectly.

Hoefer® Glass and Alumina Plates for Mini Vertical Systems

Small Glass and Alumina Plates for Mini Vertical Units.

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems. (see notes below). 

This set includes precision-crafted glass and alumina plates for electrophoresis applications. Includes a variety of notched and rectangular plates in 10 x 8 cm and 10 x 10.5 cm sizes, ideal for customizing your vertical gel setup.

*Alumina plates are not recommended for use with the Hoefer® miniVE™ Vertical Protein Electrophoresis and Blotting System. 
 

Hoefer® PlateMate™ Glass Plate Washer and Storage Kit

Hoefer® Spacers for Dual and Air Cooled Vertical Systems

Gel Spacers for SE400 and SE600 Series Vertical Electrophoresis Systems.

Engineered for consistent gel casting, these precision-machined spacers are made from high-strength, chemically resistant plastics. Available in three lengths (8, 16, and 24 cm) and multiple thicknesses (0.75 mm, 1.0 mm, 1.5 mm) to accommodate various gel formats.

All 1.0 mm spacers are white for quick identification during setup.

Proudly made in the USA! Click here for more made in America products!

Hoefer® T-Spacers for Mini Vertical Systems

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems.

Ensure accurate gel thickness and leak-free casting with precision-milled T-spacers. All spacers are precision-machined from durable plastics for high chemical resistance and optimum tensile strength. These spacers provide consistent alignment and long-term durability for mini vertical systems.

Available in multiple lengths (8 cm and 10.5 cm) and thicknesses (0.75 mm, 1.0 mm, and 1.5 mm) to suit your specific gel requirements.

Proudly made in the USA! Click here for more made in America products!

ENDURO™ Power Supply 

• Two models (300V and 250V) available
• For DNA, RNA, or protein electrophoresis, and blotting applications
• Constant voltage or constant current with automatic crossover
• 250 V model also offers a constant power operating mode
• Timed or continuous operation
• Short circuit and over current/ over voltage protection
• No load and load change detection system
• Programming includes option for automatic recovery after power failure
• 3 year warranty

The new Enduro™ Power Supplies meet a wide range of applications including DNA, RNA, and protein electrophoresis, blotting, and many others. Two models are available with voltage ranges to 300 V and current ranges to 3000 mA. Operating modes include constant voltage or constant current with automatic crossover. In addition, the 250V model offers a constant power operating mode.

All parameters, including voltage, current, power (250 V model only), and time are easily set using the membrane keypad and displayed digitally on the back lit LCD. Compact in design with a small footprint, the Enduro™ Power Supplies are also stackable to save space. For easy viewing and setting of parameters on the bench or on a shelf, the front of the power supply can be raised with the integral folding feet.

Specifications

ENDURO™ GDS II Gel Documentation System - GDS II & GDS Touch II

Product Features

• Region of interest (ROI) function allows optimal exposure in less than 30 seconds. No more multiple exposures to get good images!
• Transilluminator good for 30,000 hours so you won't need to buy replacement UV bulbs
• Save photo files as jpeg or 16bit Tiff files ideal for publication
• Made in U.S.A.
• Included fully-featured qualitative software ideal for creating publication and notebook-quality images 

ENDURO™ GDS II Applications

• Visible protein stains like Coomassie blue or silver stain
• Designed for DNA
• Ethidium bromide
• Safe Dyes such as GelGreen® and SYBR™ Safe 

ENDURO™ GDS II and GDS Touch II are the next-generation Gel Documentation Systems from Labnet International. These gel documentation systems are used for visualization of DNA and protein stained within a gel and provide photo documentation of these gels in a laboratory setting.

The GDS II comes in either a 302 nm or 365 nm version and runs on a Windows-based PC (not included).

The GDS Touch II comes in either a 302 nm or 365nm wavelength version with 470 nm epi-blue lights for use with Safe Dyes that eliminate the need for ethium bromide.

Both versions now come with a storage location on top to help maximize bench space and provide a place for accessories.

Specifications

	GDS II	GDST II
Image Resolution	3.2 MP	3.2 MP
Field of View	15 x 20 cm	15 x 20 cm
Standard Illumination	UV (302 or 365nm), epi white	UV (302 or 365nm), epi-white, epi-blue
System Controls	Windows 10 PC or laptop (not included)	Windows 10 tablet (built-on)
USB 2.0 Ports	2	2
Dimensions	12 x 15 inches (31 x 38 cm)	12 x 15 inches (31 x 38 cm)
Certifications	cTUVus; CE	cTUVus; CE
Computer Specifications	PC or laptop* (not included)	Tablet included

*PC or Laptop must meet the following minimum specifications

• Windows 10
• Intel® processor
• 1.4 GHz processor speed
• 2 GB RAM
• 16 GB free hard disk space
• 2 USB 2.0 or higher

Proudly made in the USA! Click here for more made in America products!