2026 Centrifuge Promo!

For a limited time, enjoy discounted pricing on the
MC-24R Refrigerated Microcentrifuge (C2417-R)

 

WAS $6,087.87 | NOW $4,999.00

 

Use promo code CEN26.

 

Click here for more Benchmark Bundles

or see flyer for more details.

 

Free offers require purchase of designated item(s) at list price (Price reflected in flyer).

Offer is valid from 06/30/26 to 12/31/26 or while supplies last.

Cannot be combined with other offers or discounts. Not valid on previous purchases or institutional pricing.

Special price applies only to the item specified. Valid in the USA only.

All standard terms and conditions apply.

MC-24R Refrigerated Microcentrifuge   

2026 Centrifuge Promo!

Limited Time Z216-K Bundle Options (Z216-K-BND44 or Z216-K-CMB)

Z216-K-BND44 Bundle Includes:

One Z216 MK Refrigerated Microcentrifuge (Z216-MK), 115V

& One 44 Place Rotor (Z216-4420)

Z216-K-CMB Bundle Includes:

One Z216 MK Refrigerated Microcentrifuge (Z216-MK), 115V

& One COMBI-Rotor (Z216-2420S)

Add item Z216-K-BND44 or Z216-K-CMB to your cart for bundling discounts.

Click here for more Benchmark Bundles

or see flyer for more details.

Free offers require purchase of designated item(s) at list price (Price reflected in flyer).

Offer is valid from 06/30/26 to 12/31/26 or while supplies last.

Cannot be combined with other offers or discounts. Not valid on previous purchases or institutional pricing.

Special price applies only to the item specified. Valid in the USA only.

All standard terms and conditions apply.

Z216-MK High-Speed Refrigerated Microcentrifuge

• 9 rotor options with a capacity of up to 44 x 1.5/2.0 mL

• High speed, 15,000 rpm/21,631 x g

• Powerful refrigeration, room temp. to 4°C in <10 min

• Accepts tubes from 0.2 mL to 5 mL

• 5 Year Warranty

Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.

All common microtubes (0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0 mL centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy-to-use front panel can adjust accel/decel rates and change the end-of-run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5 mL dual-row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.

In the Z216-MK model a powerful, compressor-driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.

Specifications

Speed Range	200 to 15,000 rpm
Max. RCF	21,379 x g
Max. Capacity	44 x 1.5/2.0 mL
Temp. Range	-20°C to 40°C
Dimensions	11 x 21.6 x 11.4 in.
	27.9 x 54.9 x 29 cm.
Weight	77lbs (35kg)
Electrical	120V, 60Hz

Accessories & Parts

Item #	Description
Z216-2420S	COMBI-rotor™ w/ Quick-Seal™ Lid for 24 x 1.5/2.0 mL and 4 x PCR Strips (15,000 rpm/ 21,631 xg)
Z216-2420	Rotor, 24 x 1.5/2.0 mL w/ Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-2420H	Rotor, 24 x 1.5/2.0 mL w/ Hermetically Sealed Aluminum Lid (15,000 rpm/ 21,379 xg)
Z216-3020H	Rotor, 30 x 1.5/2.0 mL w/ Quick-Seal™ Lid (13,500 rpm/ 19,151 xg)
Z216-4420	Rotor, 44 x 1.5/2.0 mL w Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-24SC	Rotor, 24 x 1.8 mL Spin Column Kits w/ Quick-Seal™ Lid (13,500 rpm/ 17,317 xg)
Z216-3202	Rotor, 4 x PCR Strips (32 x 0.2 mL Tubes) (15,000 rpm/ 15,343 xg)
Z216-1205	Rotor, 12 x 5 mL Centrifuge Tubes (14,500 rpm/ 19,978 xg)
Z216-24HEM	Rotor, Hematocrit, 24 x Capillary (12,000 rpm/ 14,970 xg)

 
 

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
  
• Advanced programming with auto-rotor recognition
• Optional high speed rotors, providing up to 24,000 xg
• Available with refrigeration
• 5 Year Warranty 

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique "Mid-Range" swing out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250 mL rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

• HIGH CAPACITY 4 x 750 mL swing out rotor, 68 x 15 mL or 28 x 50 mL
• Ideal for Tissue Culture applications
• Advanced programming with automatic rotor recognition
• Available with refrigeration

The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750 mL swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50 mL or 68 x 15 mL tubes.

Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.

Specifications

2026 Centrifuge Promo!

Z327 Bundle Options (Z327-BND or Z327-BND-BD)

 

Z327-BND Bundle Includes:

One Z327 Universal Centrifuge (Z327), 120V

One 4 x 200 mL Swing-out Rotor (Z327-200-AC)

Two 200 mL Round Buckets (Z327-200-BUK)

Two 2 x 50 mL Conical Buckets (Z327-200-B50) *not lid compatible

Two 4 x 15 mL Conical Inserts (Z327-200-A15B) *not lid compatible

 

Z327-BND-BD Bundle Includes:

One Z327 Universal Centrifuge (Z327), 120V

One 4 x 200 mL Swing-Out Rotor with 4 Buckets (Z327-200)

Two 7 x 10/15 mL Round Inserts (Z327-200-A10)

Two 8 x 1.8-7 mL Blood Tube Inserts (Z327-200-A57)

 

Add item # Z327-BND or Z327-BND-BD to your cart for bundling discounts.

 

Click here for more Benchmark Bundles

or see flyer for more details.

 

Free offers require purchase of designated item(s) at list price (Price reflected in flyer).

Offer is valid from 06/30/26 to 12/31/26 or while supplies last.

Cannot be combined with other offers or discounts. Not valid on previous purchases or institutional pricing.

Special price applies only to the item specified. Valid in the USA only.

All standard terms and conditions apply.

 

Please note this unit is replacing the Z326

Hermle Z327 Universal Centrifuge

Both the tabletop centrifuge Z 327 and the refrigerated tabletop centrifuge Z 327 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing-out, micro, or high-volume angled rotors is very simple and can take place in a matter of seconds.

The Z 327 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Main Attributes

• Brushless induction drive
• Microprocessor control
• Motor-driven lid lock
• Automatic rotor identification system with over-speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• Autoclavable rotors
• Display functions

Diagnostic program

• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates, possibility of unbraked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one-handed operation    

Z307 Universal Centrifuge

• max. Speed: 14,000 rpm
• max. RCF: 18,624 xg
• max. Volume: 4 x 200 ml
• Speed range: 200 - 14,000 rpm
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 35 cm x 33 cm x 47 cm
• Weight: 30 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• One-hand closing
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• Autoclavable rotors

• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continious
• Simple one handed opertaion

2026 Centrifuge Promo!

Z366 Bundle with High-Capacity Swing-Out Rotor & Conical Inserts (Z366-BND)

 

Bundle Includes:

One Z366 Centrifuge (Z366), 115V

One Swing-Out Rotor (Z366-250-HC)

Two 4 x 50 mL Conical Inserts (Z366-250-B50)

Two 10 x 15 mL Conical Inserts (Z366-250-B15)

 

Add item # Z366-BND to your cart for a bundle discount.

 

Click here for more Benchmark Bundles

or see flyer for more details.

 

Free offers require purchase of designated item(s) at list price (Price reflected in flyer).

Offer is valid from 06/30/26 to 12/31/26 or while supplies last.

Cannot be combined with other offers or discounts. Not valid on previous purchases or institutional pricing.

Special price applies only to the item specified. Valid in the USA only.

All standard terms and conditions apply.

 
Hermle Z366 Benchtop Universal Centrifuge

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
• Advanced programming with auto-rotor recognition
• Optional high-speed rotors, providing up to 24,000 x g
• Available with refrigeration
• 5 Year Warranty 

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique Mid-Range swing-out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing-out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5 mL micro-rotor to a high capacity 6 x 250 mL rotor.

A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy-to-use front panel can adjust accel/decel rates, and change the end-of-run alarm tone.

Specifications

• Ultra high capacity, (4 x 1000 mL, 98 x 15 mL or 40 x 50 mL)
• Accepts 500 mL or 750 mL blood bags

Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accommodating as many as 40 x 50 mL conical or 96 x 15 mL conical tubes per run.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40°C, also features a pre-cool function that ensures the temperature of the chamber is optimized for any application.

A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving "underbench" model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory.

For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge.

• Two models
• Floor-standing, with storage drawer
• Underbench (27.5″ height for use under the bench)

The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless-steel housing and parts make the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non-perforated. Clarified liquids exit the unit via the drain located on the side of the unit.

Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates and change the end of run alarm tone.

• High-speed, up to 10,000 rpm
• Transparent lid
• Stainless steel housing, chamber and parts
• Perforated and non perforated basket available
• Optional connection for external temperature control