Hoefer® Mighty Small II Deluxe Mini Vertical Electrophoresis System

Combines the advantages of small format and efficient cooling for rapid screening of proteins and nucleic acids.

• Maximum glass plate size 10 x 10.5 cm
• Flexible design, additionally able to accommodate 10 x 8 cm format with optional accessories
• Supports a wide variety of precast gels
• Efficient active cooling ensures sharp bands
• Run up to four gels at one time under identical conditions
• Quick and easy to assemble
• Choose from a wide variety of accessories  

Hoefer® Mighty Small II Deluxe Complete Units (SE260-10A)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber/Cooling Core, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Casting Cradle w/Sealing Gasket Set, 1/ea
• Casting Clamp Assemblies, 2/ea
• Cams, 4/ea
• Glass Plates, Rectangular, 10 x 10.5 cm, 10/ea
• Alumina Plates, Notched, 10 x 10.5 cm, 5/ea
• Spring Clamps, 4/ea
• Combs, 10 well, 2/ea
• T-Spacers, 4/ea
• Well Locating Decals, 2/ea
• Gel Seal, 1/ea

Hoefer® Mighty Small II Deluxe Basic Unit (SE260B)

The same as above without the combs, spacers, plates, and caster. For use with precast gels or order two SE211A combs, two sets of 10.5 cm long spacers,
10 x 10.5 cm rectangular glass and notched alumina plates, and a gel caster.

• Alumina Plates, Notched, 10 x 10.5 cm, 5/pk
• Spring Clamps, 4/pk
• Combs, 10 well, 2/pk
• T-Spacers, 4/pk
• Well Locating Decals, 2/pk
• Gel Seal/pk

Hoefer® Wide-Mini Vertical Protein Electrophoresis System

Extra wide format is ideal for quick, high-throughput runs. The SE640 is an extra wide vertical protein electrophoresis unit that accommodates up to 112 samples at one time.

• Maximum glass plate size 18 x 8 cm
• Permits rapid screening of up to 112 samples at one time
• Design permits gels to be surrounded uniformly by buffer so heat dissipation is efficient. 
• Bands are sharp and lanes are straight
• Accommodates denaturing or native polyacrylamide gels
• Run up to four second dimension gels using IEF strips or tube gels

Hoefer® Wide-Mini Complete Unit (SE640-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Glass Plates 18 x 8 cm, 6/pk
• 8 cm Clamp Assemblies, 4/pk
• Cams, 6/pk
• Dual Casting Stand with Leveling Base, 1/ea
• Laminated Gaskets for Casting Stand, 2/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Bubble Level, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• 1.5 mm Thick Spacers, 2 cm wide, 4/pk

Hoefer® Wide-Mini Basic Unit (SE640)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 8 cm long spacers separately.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Mini Horizontal Agarose Electrophoresis System

Designed for very fast separations of DNA restriction fragments in agarose gels. To achieve passive cooling, you simply fill the clear molded base with 50% ethylene glycol coolant solution, seal it, and place it in a freezer or ice bath until ready to use.

• Fast separations - run a 7 x 10 cm gel in as little as 5 minutes
• UV-transparent running tray allows the user to image the gel without risk of damage due to handling
• Variety of comb sizes enables customization of sample throughput to fit your laboratory's requirements 
• Adjustable comb height offers complete control over well depth
• Gel Casting Kit Includes 7 x 10 cm Running Tray, 7 x 10 cm Casting Tray, and 4 Foam Gaskets

Complete Unit (HE33-8-15)

• Buffer Chamber Assembly, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Running Tray, 1/ea
• Casting Tray, 1/ea
• Foam Gaskets, 4/pk
• Bubble Level, 1/ea
• 1.5 mm thick, 8-well comb, 1/ea
• Comb Back, 1/ea 

Basic Unit (HE33B)

The same as above, without the comb and comb back. Order separately.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Mighty Small II Mini Vertical Electrophoresis System

Designed for quick screening and rapid separation.

• Maximum glass plate size 10 x 8 cm
• Efficient active cooling ensures sharp bands
• Quick and easy to assemble
• Requires minimal buffer

Easily upgradable to the SE260 (with optional accessories), resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels, enabling a wider variety of precast gel options.

Hoefer® Mighty Small II Complete Units (SE250-10A)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber with Cooling Core, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Casting Cradle with Sealing Gasket Set, 1/ea
• Casting Clamp Assemblies, 2/ea
• Cams, 4/ea
• Glass Plates, Rectangular, 10 x 8 cm, 10/ea
• Alumina Plates, Notched, 10 x 8 cm, 2/ea
• Spring Clamps, 4/ea
• Combs, 10 well, 2/ea
• T-Spacers, 4/ea
• Well Locating Decals, 2/ea
• Gel Seal, 1/ea

Hoefer® Mighty Small II Basic Unit (SE250)

Proudly made in the USA! Click here for more made in America products!

• Uniform Illumination | Four 302 nm Bulbs
• Adjustable UV Safety Cover | Easy Access to Gels
• Large Scratch Resistant Viewing | 16.5 x 13.5 cm

The E3100 Compact UV Transilluminator has a surprisingly small footprint (just over 12 x 8 In.) yet provides industry leading performance. It will accommodate one or two mini gels on the 16.5 x 13.5 cm scratch resistant viewing surface.

The integrated UV blocking cover is made from a polymer that will not fluoresce in UV light. This allows clear viewing of DNA bands through the cover yet offers full UV blocking protection. Two friction hinges on the front edge of the cover allow for full adjustment. Position the cover horizontally for general viewing, tilt it at an angle for gel access and band cutting, or open fully to use the SmartDoc™ Imaging Enclosure (sold separately) for gel imaging with a smartphone.

The transilluminator’s four 6W bulbs evenly illuminate the viewing surface, and the 302 nm wavelength is ideal for Ethidium Bromide, SmartGlow™, SYBR Green®, Gel Green™ and many other common gel stains.  Spacing of the UV bulbs, coupled with a reflector system and special diffusing filter glass provides exceptional uniformity across the viewing surface. This allows for quantification of DNA and higher quality imaging when used with a camera system.

Specifications
 

Light source 4 x 6W UV Light Bulbs	4 x 6W UV Light Bulbs
Safety cover UV blocking polycarbonate	UV blocking polycarbonate
Exterior dimensions	10 x 8 x 2.75 In. | 25.4 x 20.32 x 6.99 cm
Electrical	12VDC (AC power adapter included)
Output wavelength	Peak at 302 nm
Viewing surface	6.5 x 5.3 In. | 16.5 x 13.5 cm
Weight	2 lbs. | 0.9 kg.
Warranty	2 years

Item # E3100 is proudly made in the USA! Click here for more made in America products!
 

Hoefer® Submarine Gel Electrophoresis Systems 

• Color-coded and height-adjustable combs easily identify comb thickness at a glance and control well depth
• Colored loading strips - for easy well detection when loading
• UV-transparent running tray allows user to image gel without risk of damage due to handling
• Buffer recirculation ports may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation (*Not included for SUB6 and SUB10) 
• Includes
• Buffer Chamber Assembly, 1/ea
• Safety Lid, 1/ea
• High Voltage Leads, 1/ea
• Colored Loading Strips, 1/ea
• Buffer Recirculation Ports, 2/pk (*Not included for SUB6 and SUB10)
• Running Tray, 1/ea
• Combs, 1/ea 

Mini (SUB6), Mini+ (SUB10) and Midi (SUB13) Submarine Gel Electrophoresis Systems

The SUB6 and SUB10 are ideal for routine nucleic acid preparatory and analytical electrophoresis techniques. SUB13 Midi is ideal for analytical and preparative studies of nucleic acids. Maximum of 32-sample (SUB6), 80-sample (SUB10), or 112-sample (SUB13) throughput capacity and features a removable gel-casting tray with end gaskets that allow gels to be cast directly within the tank.

• Compact tank reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time
• Side handles for safe and easy transportation around the laboratory 
• Includes
• Running Tray with Silicone Gasket*
• 1 mm thick, 8-well combs, 2/pk (SUB6 Only)
• 1 mm thick, 16-well combs, 2/pk (SUB10 and SUB13 Only)

*The included running tray is lined with silicone gaskets, which form a leak-proof seal against the inner walls of the running chamber when the running tray is turned 90° to the direction of electrophoresis.

Standard (SUB15) Submarine Gel Electrophoresis System

Provides the most commonly used tray size and comb options. Highly versatile option for screening nucleic acid samples ranging from DNA mini-preps to PCR products. 120-sample maximum throughput.

• The market standard - a 15 x 15 cm gel tray, with comb options ranging from 1 to 30 samples
• Multi-channel pipette compatible combs with a maximum 30 sample throughput reduce gel loading time, while preparatory combs enable nucleic acids to be scaled up for cloning
• Side handles for safe and easy transportation around the laboratory
• Includes
• Running Tray with Casting Gates*
• 1 mm thick, 16-well combs, 2/pk 

*The included casting gates conveniently and efficiently seal the running tray without the hassles of using tape.

High Throughput (SUBHT) Submarine Gel Electrophoresis System

Ideal for high throughput screening applications like single strand polymorphism (SSP) analysis following PCR. This horizontal gel unit can resolve DNA strands from 50 – 1000 base pairs in 30 minutes and accommodate up to 120 samples (96-well plate + 24 control and/or marker samples). 

• Fast, error-free loading - Load an entire 96-well plate using a multichannel pipette
• Simplified analysis - Fluorescent labels for each sample printed on a UV transparent gel tray allows for instant sample identification (matched to a 96-well plate) during post-run visualization
• Eliminate variability caused by running buffer pH drift and ionic gradient formation with optional buffer recirculation capability
• Compact tank design needs less buffer to cover gel which not only reduces buffer consumption but provides greater control of voltage gradients and run times
• Fully compatible with a wide range of combs and accessories to meet all your high throughput and standard gel analysis needs
• Includes
• Fluorescent Labeled Running Tray with Casting Gates
• 1 mm thick, 30 well combs, 4/pk 

Maxi-Standard (SUB20) and Maxi-Cooled (SUB20C) Submarine Gel Electrophoresis Systems

20 x 20 cm gel-running tray with four comb positions, which allows the user to perform high-resolution analytical and preparative studies of nucleic acids. Handles up to 168 samples. 

• Multichannel pipette compatible combs with a maximum 40 sample throughput reduces gel loading time
• Side handles for safe and easy transportation around the laboratory 
• Includes
• Buffer Chamber Assembly with Cooling Ports (SUB20C Only)
• Running Tray with Casting Gates
• 1 mm thick, 16 well combs, 2/pk

*The included casting gates conveniently and efficiently seal the running tray without the hassles of using tape.

Maxi-Plus Standard (SUB25) and Maxi-Plus Cooled (SUB25C) Submarine Gel Electrophoresis Systems

Ideal for high-throughput screening of nucleic acids, particularly PCR products, and in genotyping studies. It has a 25 x 30 cm gel-running tray with 12 comb positions accommodating a maximum throughput of 624 samples.

• Multichannel pipette compatible combs—with a maximum 52 sample throughput, reduce gel loading time
• Side handles—for safe and easy transportation around the laboratory
• Includes
• Buffer Chamber Assembly with Cooling Ports (SUB25C Only)
• Running Tray w/Casting Gates
• 1 mm thick, 26 well combs, 6/pk   

Proudly made in the USA! Click here for more made in America products!

Hoefer® Tall Air-Cool Vertical Electrophoresis System

Compact, rugged, and economical units ideal for educational laboratories with multiple users.

• Maximum glass plate size 18 x 24 cm
• Rugged injection molded construction is durable and assembles easily 
• Run two gels with the addition of a divider plate
• Built-in casting stand seals leak free
• Choose from a wide variety of accessories
• Plates, clamps, spacers, and combs are interchangeable with the SE600 Series 

Hoefer® Tall Air-Cool Complete Unit (SE410-15-15)

• Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with Electrodes, 1/ea
• Glass Plates, 18 x 24 cm, 2/pk
• Clamp Assemblies, 8 cm, 2/pk
• Clamp Assemblies, 16 cm, 2/pk
• Cams, 2/pk
• Slotted Gasket for Upper Buffer Chamber, 1/ea
• Bubble Level, 1/ea
• Laminated Gasket for Casting Stand, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge-Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Comb, 15-well, 1.5 mm thick, 1/ea
• Spacers, 1.5 mm thick, 2 cm wide, 2/pk 

Hoefer® Tall Air-Cool Basic Unit (SE410)

The same as above without the combs and spacers. Order one SE511 comb and one set of 24 cm long spacers separately.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Air-Cooled Vertical Electrophoresis System

Compact, rugged, and economical units ideal for educational laboratories with multiple users.

• Maximum glass plate size 18 x 16 cm
• Rugged injection molded construction is durable and assembles easily
• Run two gels with the addition of a divider plate
• Built-in casting stand seals leak free
• Choose from a wide variety of accessories
• Plates, clamps, spacers, and combs are interchangeable with the SE600 Series 

Hoefer® Air-Cooled Complete Unit (SE400-15-15)

• Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with Electrodes, 1/ea
• Glass Plates, 18 x 16 cm, 2/pk
• Clamp Assemblies, 16 cm, 2/pk
• Cams, 2/pk
• Slotted Gasket for Upper Buffer Chamber, 1/ea
• Bubble Level, 1/ea
• Laminated Gasket for Casting Stand, 1/ea
• Spacer-Mate-Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Comb, 15-well, 1.5 mm thick, 1/ea
• Spacers, 1.5 mm thick, 2 cm wide, 2/pk 

Hoefer® Air-Cooled Basic Unit (SE400)

The same as above without the combs and spacers. Order one SE511 comb and one set of 16 cm long spacers separately.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Max Horizontal Agarose Electrophoresis System

Offers a variety of gel lengths and comb sizes to enable the design of the gel required for optimum resolution of DNA fragments. Facilitates high-resolution separation of nucleic acid fragments 100 bp to 20 kbp. Three different length trays are available for use with this unit. 

• Self-locating/centering guides support consistent running tray placement
• Gel anchor feet prevent the gel from floating or sliding during the run
• A variety of comb sizes enables customization of sample throughput to fit your laboratory's requirements
• Adjustable comb height—complete control over well depth
• Three casting kits available—enabling users to run 15 x 20, 15 x 15, or 15 x 10 cm gels in the same unit
• Gel Casting Kit Includes 15 x 10, 15 x 15, or 15 x 20 cm Running Tray, 15 x 10, 15 x 15, or 15 x 20 cm Casting Tray, and 4 Foam Gaskets

Complete Unit (HE99X-15-15)

• Buffer Chamber Assembly, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Running Tray, 15 x 20 cm, 1/ea
• Casting Tray, 15 x 20 cm, 1/ea
• Foam Gaskets, 4/pk
• Bubble Level, 1/ea
• 1.5 mm thick, 15-well comb, 1/ea
• Comb Back, 1/ea

Basic Unit (HE99X)

The same as above, without the Running Tray, Casting Tray, Comb, and Comb Back. Order a casting kit, combs, and comb backs separately.

Proudly made in the USA! Click here for more made in America products!

Hoefer® Power Supplies

Small footprint, large handle, and simple operation make Hoefer® Power Supplies easy to set up and use in your lab. With a large, easy-to-read LED, simply set the constant parameter, set the timer (if desired), and push start.

• Constant voltage or constant current mode with automatic crossover
• Four sets of 4 mm output jacks
• Continuous runs or a 999-minute timer
• Automatic recovery after power failure
• Open circuit detection
• Short circuit protection

Modes of operation

Constant Voltage Mode: the power supply will attempt to maintain the user selected voltage by automatically adjusting the current flow.

Constant Current Mode: the power supply will attempt to maintain the user selected current flow by automatically adjusting the voltage supplied.

Automatic Crossover: when the constant parameter (voltage or current) cannot be maintained due to power supply operating limits, the power supply automatically switches to maintaining the other parameter.

• PS300B 300 Volt Power Supply is designed for most electrophoresis techniques.
• PS200HC 200 Volt High Current Power Supply is ideal for large electrophoretic blotting applications and for low voltage electrophoresis runs.
• PS600 600 Volt Power Supply is designed for electrophoresis and blotting techniques, including large format and high throughput applications.

Hoefer® Mighty Small Transfer Tank

The TE22 Mighty Small Transfer Tank quickly and efficiently transfers proteins and nucleic acids from small gels to nylon, nitrocellulose or PVDF membranes. Maximum Gel Size 9 x 10 cm.

• Transfer as many as four small gels, up to 9 x 10 cm in less than an hour
• Uniform and strong electric field—supports efficient and even transfers
• Color-coded, easy to assemble and load cassettes—ensures proper orientation during transfer
• Superior tank design allows the cassettes to apply equal pressure across the stack - prevents gel distortion
• Built-in ceramic heat exchanger—provides excellent temperature control when used with an external cooling water bath
• Built-in alumina-covered cooling channel provides excellent temperature control with no more than a 5°C temperature increase during a typical run

Hoefer® Mighty Small Transfer Tank Includes

• Lower Chamber with Heat Exchanger, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Electrode Panels, 2/pk
• Cassettes, 4/pk
• Foam Sponges, 6 mm thick, 4/pk
• Foam Sponges, 3 mm thick, 8/pk
• Cassette Hook, 1/ea
• Blotter Paper (9 x 10.5 cm), 25 sheets/pk

Hoefer® Mini Electrophoresis and Western Blot Package

Proudly made in the USA! Click here for more made in America products!

Hoefer® Standard Transfer Tank

The TE42 Standard Transfer Tank quickly and evenly transfers proteins and nucleic acids from polyacrylamide or agarose gels onto nylon, nitrocellulose, or PVDF membranes. The four slot design of the TE42 enables either cooled or non-cooled protein or nucleic acid transfers. The optional heat exchange module is easily incorporated into the TE42 enabling transfer of up to 2 gels simultaneously. When used without the optional heat exchange module, up to four gels can be transferred at one time.

• Uniform and strong electric field—supports efficient and even transfers
• Color-coded, easy to assemble cassettes—ensures proper orientation during transfer
• Superior tank design allows the cassettes to apply equal pressure across the stack - prevents gel distortion
• Optional TE47 heat exchanger—provides excellent buffer temperature control when used with an external cooling water bath
• Heat exchanger from an SE600 series electrophoresis unit can be substituted for the TE47 heat exchanger. 

Hoefer® Standard Transfer Tank Includes

• Lower Chamber, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Electrode Panels, 2/pk
• Cassettes, 2/pk
• Foam Sponges, 6 mm thick, 2/pk
• Foam Sponges, 3 mm thick, 4/pk
• Cassette Hook, 1/ea
• Blotter Paper (14.5 x 21.5 cm), 25 sheets/pk

Proudly made in the USA! Click here for more made in America products!