Eclipse™ Pipette Tips 

Eclipse™ pipette tips include as standard many features available from other suppliers only as special upgrades. All the Eclipse™ tips we make are made of high quality 100% pure virgin medical grade polypropylene, so you won't find recycled plastics in our tips. We pre-test the resin to ensure no extractables are present. Every lot is lab tested and certified free of detectable Nuclease (RNase/DNase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for metal contamination. All our Eclipse™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse™ refills, and in racks that have been sterilized using irradiation.

For Rainin® LTS Pipettors

1011- 20 uL Pipette Tips
1018- 250 uL Pipette Tips
1015- 300 uL Pipette Tips
1019- 1200 uL Pipette Tips

• Fits the Lite Touch™ pipettors from Rainin®
• Made of clear, pretested polypropylene resin
• Lot certified pure and free of detectable ATP, RNase/DNase (Nuclease), Endotoxin and are non-pyrogenic

For Eppendorf and Brand Pipettors

1032- 100 uL Bevel Point™ Pipette Tips, Yellow

• Ribbed top ensures solid ejection
• Beveled end retains less fluid
• Designed with wide sealing areas to fit even older pipettor barrels
• Available in yellow polypropylene

For Sartorius®  Pipettors

1048- 1200 uL Pipette Tips with UltraFine™ Points
1044- 1250 uL Pipette Tips with UltraFine™ Points

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For Matrix®  Impact 2®  Pipettors

1047- 1250 uL Pipette Tips with UltraFine™ Point, Extra Length

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For 16-Channel Finnpipette Pipettors

1007- 50 uL Pipette Tips with UltraFine™ Point

• Fill 384-well plates
  
• Very small but very straight tips in special heavy racks
  
• Clear, 100% polypropylene

Resealable Bags
Supplied in resealable polyethylene bags.  These are not recommended if you plan to store the tips for long periods since warping can occur after long periods of storage in bags.

96 Racks
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.

96 Stack Racks
This package gives you the best of both worlds; low cost and a complete high-quality rack.  You assemble the rack yourself and insert the fully racked refills into the rack.  Since you never touch the tips you don’t have to be concerned about contamination from your hands or latex gloves.  These stacks are very stable so you can pipette with a multi-channel pipette right from the stack.
 

These items have been discontinued.

Check out ILP Deep Well Round and Rectangle Well, U-Bottom Plates - 48
for more options.

Plate, 48 Rectangular Well U-Bottom 42.60 mm Height, 4.6 mL

This item has been discontinued.

Check out our other Sealing Films for more options.

ELISA and Short Term Sealing Film

Due to supply constraints 100-SEAL-PLT, STR-SEAL-PLT, XTR-100 and XTR-LG-100 are out of stock.


STR-SEAL-PLT alternative is GPS-PP-100.

PP-100 substrate is polypropylene instead of polyester for the STR-SEAL-PLT.  GPS-PP-100 is designed for the same application – ELISA/Incubation/General Storage.

100-SEAL-PLT alternative is TTS-100.

XTR-100 and XTR-LG-100 alternatives are XTR2-100 & XTR2-LG-100.
 

ELISA, Incubation, and Short Term Incubation Sealing Films

All films on this page are designed for ELISA, Incubation, and Short Term Incubation Sealing Films. If you are looking for something specific please consult our selection guides by attribute or application on this page. All films are certified DNase- & RNase-Free.

Specific film descriptions:

1x8 MiniStrips (GP-CS1X8-400 and GPS-CS1X8-400) are less expensive than full-size sheets when using only a partial plate. Designed for use with either 1x8 strip-well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed. Ideal for COVID-19 testing to seal a row of 8 wells after swabs are deposited into a deep-well plate.

General Purpose (GP-PP-100 and GPS-PP-100) polypropylene lms oer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.

Pre-scored lm (SP2-RL-500) on a roll is a more economical and ecient alternative to rapidly seal microplates or racked test tubes; faster than applying single sheeted lm. Self-standing, non-slip supports hold the pre-scored lm roll securely in place for quick and easy bench- top dispensement. The roll unwind tension can be easily adjusted to user preference. Continuous backing liner can be torn o or fed directly into a waste basket for disposal.

The SealMate SealPlate Starter Kit (SM-KIT-SP and replacement rolls) features a re-usable dispenser and two rolls of perforated lm. The dispenser facilitates the quick and easy dispensing of lm from a roll allowing microplates to be sealed three times faster than using sheeted lms. Cost-eective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes lm contamination.

SealPla te (100-SEAL-PLT and STR-SEAL-PLT) minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the edge eect which can occur with plate lids (e.g. greater evaporation in the outside plate wells).

SealPlate Color Tabs (SP-IDx-100) Each end-tab features a colored dot and white writing area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identication. The lm sheet can be removed from the plate without disturbing the identication label due to the nely perforated end-tabs. Choose from 5 dierent individual colors or the assortment pack.

SealPlate 2x8 MiniStrips (SP-2X8-50 and SPS-2X8-50) are less expensive than full-size sheets when using only a partial plate. Designed for use with either 1x8 strip- well ELISA plates or standard 96-well plates where rows must be selectively protected or accessed.

ValueSeal (SP-VS-100) features smaller dimensions and a single non-perforated end-tab to provide a more cost-eective alternative to protect samples from evaporation, external contamination, dust and particulates.

TC Treated: 384-well tissue culture-treated (TC-treated) microplates with black well walls and an optically-clear cyclic olefin bottom for imaging cells in high content analysis, high content screening, and other cell-based assays

PDL Coated: 384-well poly-D-lysine coated (PDL-coated) microplates with black well walls and an optically-clear cyclic olefin bottom for high content analysis, high content screening, and other cellular assays.

Collagen-Coated: 384-well collagen-coated microplates with black well walls and an optically-clear cyclic olefin bottom for high content analysis, high content screening, and other cellular assays.

• Safe storage container to be used with disposable bags
• Three sizes of stationary containers supplied with hinged or fitted lids
• Easy to move mobile containers equipped with heavy duty casters and large handle

Gel Cutting Tips

• Safely excise bands from gels
• Avoid cross contamination
• One-handed operation for quick and accurate gel cutting
• Safer than using razor blades and won't scratch transilluminators
• 1.1 x 4 mm

RunBlue gels are more rigid and up to 10 times stronger than conventional precast gels resulting in more robust gels that can be handled with confidence. No tearing - an 8% gel can be thrown into the air and caught without breaking!

• RunBlue gels are manufactured using a unique method of polymerisation that results in more uniform and more complete polymerisation of the Acrylamide when compared to conventional, chemical based methods. This results in gels that have superior batch to batch reproducibility and practically eliminates exposure to un-polymerised Acrylamide.
• RunBlue gels incorporate a stacking gel that has been dyed (red for SDS) for the simplest ever sample loading. In addition, there is no comb to remove as the top of the teeth are fixed in place. This not only prevents the teeth from being accidentally torn off during comb removal but that all of the wells are uniform, with the teeth remaining vertical. This prevents sample cross contamination / inability to load desired Vol. The teeth also protrude above the lower front plate of the gel cassette preventing sample flow over into adjacent wells.
• Runblue gels are available in two different cassette sizes providing compatibility with the most common gel tanks and apparatus.  10x10 cm cassettes are compatible with Invitrogen/Life Technologies equipment and any other equipment designed for this format, such as the Hoeffer and Owl tanks. Our 8x10 cm cassette is designed to fit the Biorad equipment (Mini Protean I, II and II, Tetra etc).
• The resolving gel on RunBlue gels extends to the very bottom of the cassette which not only provides improved resolution but also there is no protruding gel that requires trimming prior to blotting. There is also no additional tape / covers to remove - simply take the gel from the pack and use.
• RunBlue gels are supplied in boxes of 10 gels. They are available in a 12 well format, covering a range of concentrations and gradients.

Benefits of RunBlue Precast Gels

• 2 year shelf life - never throw away another gel
• Up to 10x stronger - no more torn, ruined gels
• Load up to 20µl - see everything in your sample
• Dyed stacking gel - makes gel loading child's play (SDS = Red)
• No comb to remove - no more broken or bent teeth
• Full length resolving gel - improved resolution and better blotting
• 10x10 cm and 8x10 cm cassette - total compatibility with most popular tanks including Invitrogen and Biorad equipment
• Fast delivery with immediate and expert technical support for total peace of mind
• Best value gels available - save money!

PowerForm® Nitrile Exam Gloves with Dry Core® | Sold by the Case