ILP Square Well, Flat Bottom Assay Plates - 384
  

Our black flat bottom 384-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays. Comes either specially packaged sterile, individually wrapped, with a non-reversible clear polystyrene lid, or non-sterile in 10 packs of 10. These completely black, polystyrene, flat-bottom assay plates provide the best signal: noise ratio in top-read fluorescence.

Our white flat bottom 384-well assay plates are ideal for luminescence and applications seeking increased signal sensitivity. These completely white, polystyrene, flat-bottom assay plates were specifically designed for luminescence applications. The highly reflective solid white color boosts signal while reducing well-to-well crosstalk.

Our clear flat bottom 384-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and absorbance/colorimetric assays (400-900 nm wavelength). Made from high optic transmission grade polystyrene, these clear flat bottom assay plates allow for top-read or bottom-read measurements in the visible range.

They come in standard 8 x 12 configuration and have molded-in alpha-numeric position markings. Each well offers a working volume of 110 uL. The rounded corner well design eliminates capillary action that can occur with square-cornered plates.

Ultra-flat surfaces, sturdy design, and rigidity optimize our 384-well assay plates for consistent handling with a variety of automated platforms for high throughput workflows.
Plates are standardized to comply with ANSI/SLAS 2004-1 guaranteeing proper fit.

• Made from polystyrene
• Uniform wall thickness
• Rigid automation-friendly design with gripper lugs
• Fits all ANSI/SLAS 2004-1 (SBS) compliant fixtures and equipment
• Lot tested and certified RNase, DNase, and pyrogen free
• Plates are available in sterile and non-sterile and non-treated

Specifications

Number of Plugs	384
Plug Shape	Square - Flat
Well Shape Top	Square
Material	Polystyrene
Adhesive Material	None
Color	Varies
Alphanumeric	Molded in
Compliance	ANSI/SBS 6-2012
Certified	Dnase-Rnase-/Pyrogen-Free
Max Vol.	130 uL
Working Vol.	110 uL
Vol. w/ Mat Lid	30 uL
Autoclavable	No
Max RCF	2,000 RCF
Max Temp.	70ºC (158ºF)
Min Temp.	-40ºC (-40ºF)

 

MTC™ Bio Transport/Culture Tubes

Sterile 16 x 100 mm Transport & Culture Tubes with Screw Caps – Polypropylene or Polystyrene.

These high-quality 16 x 100 mm sterile transport and culture tubes are designed for reliable laboratory use. Choose between transparent polypropylene tubes with a skirted, self-standing bottom or crystal clear polystyrene tubes with a traditional round bottom—ideal for sample collection, transport, and culture applications.

Each tube features leak-proof screw caps to prevent contamination, white printed graduations for easy volume measurement, and a large frosted white marking area (12 x 50 mm) for convenient labeling. Tubes are packaged sterile in bags of 100, with 10 bags (1,000 tubes total) per unit.

Key Features

• Available in polypropylene (self-standing - T7950) or polystyrene (round bottom - T7955)
• Leak-proof screw caps securely attached to each tube
• Easy-to-read white graduations for precise measurement
• Frosted marking area for clear sample identification
• Sterile packaging: 100/bg, 10 bgs/cs
• Ideal for specimen transport, cell culture, and general lab use 

Temperature Range

• Polypropylene: -80°C to 121°C (autoclavable, freezer-safe)
• Polystyrene: 0°C to 70°C (not suitable for autoclaving or freezing)

VistaLab™ Reagent Reservoirs

• Superior low retention maximizes reagent recovery up to 67% better than comparable reservoirs
• Proprietary high wettability, hydrophilic surface treatment
• Trough-within-a-trough design channels “every last drop”
• Molded graduations on the inside walls
• Pour off spouts at every corner
• Molded structures designed for easy separation of stacked reservoirs
• Wide base for increased stability

Specifications
 

Sterile	Yes
Non-pyrogenic	Yes
Primary Color	White
Primary Material	Polystyrene
RNase/DNase Free	Yes

Proudly made in the USA! Click here for more made in America products!
  

Bullet Blender® Tubes

Eppendorf™ Safe-Lock tubes are 1.5 mL polypropylene microcentrifuge tubes for use in Bullet Blender® Storm (BT24M) and Bullet Blender® 24 Gold (BB24AUP) models.

GATOR™ tubes are 1.5 mL microcentrifuge tubes for use in the Bullet Blender® Gold (BB5EAUP), (BB24AUP), and Bullet Blender® Storm (BT5E), (BT24M), (BT12LT) models. 5 mL GATOR™ tubes are for use in Bullet Blender® 5E Pro (BT5E) and 5E Gold (BB5EAUP) models. The caps stay tightly sealed even under vigorous agitation. The PCR is clean and free of RNase and DNase.

RINO® screw-cap tubes are 1.5 mL microcentrifuge tubes for use in Bullet Blender® Storm (BT24M) and Bullet Blender® 24 Gold (BB24AUP) models. They are made of a special extra-tough polypropylene material, ideal for vigorous homogenization. They are also transparent, allowing you to visualize your samples! Sterile & RNase free.

*Use only with RINO® lid gasket. RINO® tubes should not be centrifuged at speeds higher than 14,000 RCF with beads inside, as the weight of the beads can cause the tubes to leak.

HIPPO™ skirted, self-standing, 50 mL tubes are ideal for use in our 50 mL Bullet Blender® models, including the 50 Gold+ (BB50AUP), and 50 DX (BB50DXP) models. HIPPO™ Tubes can hold substantial amounts and are exceptionally durable. Caps remain tightly sealed on the tubes, even after vigorous agitation. DNAse, RNAse, and pyrogen free.
 

Hoefer® Mighty Small precast gels are high-performance mini polyacrylamide gels commonly used for protein separation. Utilizing the Bis-Tris buffer system, they effectively minimize protein modifications during electrophoresis, resulting in sharper and clearer protein bands with higher resolution.

• High loading capacity: 50 uL max. sample volume
• High resolution: Upgraded bis-Tris system for clearer, sharper separation bands and higher resolution
• Ready to use and easy to store: No solution preparation or gel casting is required, saving time. Store at 2 to 8ºC
• Good Repeatability: Fully automated gel casting process, minimal batch-to-batch variation, high stability, and good repeatability
• Highly effective: Max 40 min for electrophoresis
• Safe and non-toxic: No hazardous reagents need to be handled 

Compatible with Hoefer® Mighty Small II Vertical Electrophoresis Systems and the Hoefer® miniVE Vertical Protein Electrophoresis and Blotting Systems.  

Green Reagent Reservoirs

Innovative Design Saves Space and Reduces Plastic Waste

The "Green" Reagent Reservoirs incorporate several innovative design features that reduce plastic waste, save storage space, and enhance performance. This reagent reservoir system consists of disposable, clear polystyrene inserts that fit within a rigid base. Because the skirt on the inserts has been eliminated, this significantly reduces the amount of plastic waste that is experienced when using standard one-piece reagent reservoirs.

• Innovative design that reduces plastic waste and saves space
• Saves 75% in storage space
• Easy-to-see, bold, black Vol graduations eliminate costly overpours
• Pour-spout corners provide easy, spill-free pouring
• Unique trough within a trough design for complete sample retrieval
• 2nd reservoir can act as a lid to prevent evaporation and contamination

Not what you're looking for? Please check out alternative reservoirs here and here.

 

RephiQuik 50 mm PTFE Filter

Hydrophobic Vent Filter for Sterile Gas and Organic Solution Filtration.

The RephiQuik 50 mm PTFE Filter is a high-performance, ready-to-connect venting filter engineered with a hydrophobic PTFE membrane. Designed for use in lab and biopharma environments, this filter ensures safe and sterile air or gas flow, effectively preventing contamination.

Ideal for fermenter air sterilization and incubator gas filtration, the RephiQuik PTFE filter offers exceptional chemical resistance, making it perfectly suited for handling aggressive organic solutions. It can also be used between a pump and a receiving vessel to protect valves and pump components from damage caused by aqueous solutions.

Key Features

• Hydrophobic PTFE membrane supported by high-density polyethylene (HDPE)
• Durable polypropylene housing
• 50 mm diameter for optimized flow
• Excellent chemical compatibility
• Allows free passage of air and gases while blocking aqueous solutions and aerosols
• Equipped with ¼ In. single hose barb connections on both ends
• Autoclavable for repeated sterile use

Applications

• Sterile filtration of fermenter air
• Incubator gas filtration
• Filtration of aggressive organic solvents
• Pump and component protection in fluid systems 

Specifications
 

Diameters	50 mm
Housing material	Polypropylene (PP)
Filter Media material	PTFE
Inlet / Outlet Connections	1/4 In. Hose Barb
Pore Size	0.22 uM

Heathrow Scientific® Multi-Channel Reagent Reservoirs

Heathrow Scientific® Multi-Channel Reagent Reservoirs offer a versatile and contamination-reducing solution for multi-channel pipetting workflows. Featuring a dual-compartment design, this reservoir includes a single 50 mL basin on one side and twelve individual 5 mL slotted basins on the other—perfect for handling multiple reagents with minimal waste.

Each slotted well is numerically imprinted for easy sample identification, while angled basin walls guide pipette tips to the center, helping reduce cross-contamination and reagent loss. The included snap-on cover protects contents from evaporation and contamination during short-term storage or processing.

Made from white polypropylene, this disposable yet autoclavable reservoir is ideal for sterile environments. Sold in packs of 25, it’s a practical consumable for research, clinical, and industrial laboratories.

Key Features

• Dual compartments:
• One 50 mL basin
• Twelve 5 mL individually numbered slotted wells
• Angled wells reduce pipette tip waste and cross-contamination
• Numerical imprinting for sample tracking
• Protective cover is included to minimize evaporation and contamination
• Made from durable white polypropylene
• Autoclavable and disposable
• Compact size: 4.9 x 2 x 1.5 In. (12.5 x 5 x 3.7 cm)

Bio-Pure Biodegradable Reagent Reservoirs

• 100% biodegradable, eco-friendly
• Trough within a trough design maximizes sample recovery
• Pour spout corners
• Graduations on inside wells

Krystal™ 2000 Plates

The premium polycarbonate Krystal™ 2000 plates have been optimized for luminescence and fluorescence assays. A proprietary manufacturing process provides for clear, individual wells in an opaque matrix. The special design of the plate eliminates well-to-well light cross-talk, improving the accuracy and precision of photometric readings.

Krystal™ 2000 plates are supplied in a 96 x 350 μL well format. Clear wells allow for measurements to be performed with both top and bottom reading instruments. The white matrix provides for maximum reflectivity, allowing high sensitivity luminescence assays. The black matrix absorbs light to minimize background interference in fluorometric assays. Plates are available as tissue culture-treated. The tissue culture plates are supplied in packages of 100.

• Unmatched accuracy and repeatability for fluorescence and luminescence assays

• Unique, individual clear well design eliminates cross talk, and allows for reading above or below wells

• Sleeved plates with lids are available for use in robotic systems

• 96-well format (350 µl well volume)

• Bar coding available

Reagent Reservoir Cooler 

Reagent Reservoir Cooler - Benchtop Cooling of Reagents

• Extend benchtop working time and keep reagents cool for up to 3 hours.
• Reagents are kept at ~5°C for approximately 3 hours
• No need for a cumbersome ice bath, the frozen non-toxic gel is contained in a sealed molded cavity.
• Extra cold incubation time
• Extends safe working time for temperature-sensitive reagents
• 100 mL and 25 mL Reservoirs fit perfectly and snugly onto the Cooler, ensuring uniform cooling.

Proudly made in the USA! Click here for more made in America products!

MDPI-3000 Direct Thermal Printer

• Fine Detail: Print text & barcodes with 300 DPI resolution
• Easy to Use: Comes with Label LIVE design software for Windows and macOS
• Easy Adjustment: Fully adjustable sensor for use with a variety of label sizes
• Wide Print Width: Full-size print up to 4 In. (102 mm)
• High Capacity: Fits roll diameters up to 4.25 In. (108 mm)