Mystaire® PCR Prep Stations

Compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments.

Airborne contaminants are prevented from entering into the work zone through constant positive pressure HEPA filtered air. Each PCR prep station is equipped with a built-in 254 nanometer shortwave lamp to effectively decontaminate the work area between amplifications. Safety interlocks are included on all PCR prep stations to prevent operator exposure to potentially harmful UV radiation.

MY-PCR prep stations are bench-top personal clean zones allowing the operator to amplify RNA and DNA while minimizing the potential for background from airborne contaminants.

*Note: MY-PCR and FE-PCR are not biological safety cabinets. They are designed to provide process protection only from potential airborne contaminants found in the laboratory space.

• Class 100 vertical laminar flow air
• 15-Minute UV light timer
• Clear polycarbonate construction with chemically impervious polypropylene work surface
• UV shelf with integrated pipette holder
• Electrical cord pass-through port
• Sash position switch and overlap to prevent UV light exposure
• HEPA Filters, Pre-Filters, UV bulbs, additional ports and shelves also available
  

Specifications
 

Item #	MY-PCR24	MY-PCR32	MY-PCR48
Dims (D x W x H)	24 x 24 x 30 In. 609.6 x 609.6 x 762 mm	24 x 32 x 30 In. 609.6 x 812.8 x 762 mm	24 x 48 x 30 In. 609.6 x 1219.2 x 762 mm
Noise Level	<45 DBA	<49 DBA	<56 DBA
Voltage	110 V or 220 V
Power	200 Watts		400 Watts
UV Light	15 W/254 mm		15 W/254 mm (2)
Blower	Sparkless Brushless
UV Light Timer	0 to 15 min.
Safety Interlock	Yes
Air Velocity	60 LFM

Mystaire® PCR Prep Stations are proudly made in the USA! Click here for more made in America products!

So-Low Upright Freezers

Efficiency and Dependability for the Most Demanding Environments!

Laboratory professionals all over the world are recognizing the dependability and efficiency of So-Low's Ultra Low Freezers, the first to combine all of these performance features and deliver a level of quality construction, reliability and value unequaled anywhere in the world.

• Compressor life is extended by an energy-saving low stage (operates only on demand).
• Compressors are protected with a constant flow of refrigerant.
• Heat is efficiently and effectively dissipated by an air-cooled condenser with three fans.
• Monitoring light to warn of clogged condenser.
• Freezer has an automatic timer system that will restart the unit in case of power failure.
• Large air-cooled condenser with front to back air flow resulting in cooler compressors.
• Special hinged grill for easy opening provides for a quick visual check of the condenser.
• CFC-Free DuPont Suva 95 Refrigerant.

Available Accessories

• Chart Recorders, 7 Day - 6"
• Inventory Control Systems
• Porthole Access
• CO₂ and LN₂ Back-Up Systems
• Stainless Steel Chambers
• Baskets - Rails
• Three-Phase Electrical Wiring
• Power Booster - Low Voltage Safety System
• Telephone Alarm System

Freezers are also available for -20, -30, -40 and -96°C.

Specifications

*MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

**V80-30 is only -80

Dimensions 

Proudly made in the USA! Click here for more made in America products!

VistaLab™ ali-Q™ 2 Pipet Controllers

Repeat Pipetting Plus Conventional Pipetting with a Single 2-in-1 Controller!

• Faster and Easier Aliquoting. No Need to Watch the Lines. More Accurate and Reproducible Than by Eye.
• Highly reproducible accuracy with the press of one button
• Use any size and any brand of serological pipets
• Plus aspirate and dispense as you’re used to
• Ideal for cell culture, dispensing media, filling plates, tubes, cryovials, etc.

Features Of The ali-Q™ 2 Series

• Speed dial for adjustable aliquoting speed (VS model only)
• On-board calibration software
• Removable kickstand
• Lighter weight
• Sensitive touch-control aspirate and dispense buttons
• Aliquot button
• Aliquot volume dial
• 2 multifunction LED indicators
• Multiple alert tones
• Rechargeable lithium ion battery

Specifications

Proudly made in the USA! Click here for more made in America products!

Pipet-Aid® XP

The industry standard for laboratory sample handling. With an easily accessible 9-volt (Ni-MH) rechargeable battery and the ability to accommodate most pipettes from 1 to 100 mL, you'll have the flexibility to work wherever while sampling whatever.

The XP's speed settings for pipet filler and dispenser modes provide precise control and accuracy. The fast speed mode delivers up to 50 mL in 5 seconds, while the slow speed mode is ideal for using small pipettes or when you need more precise delivery.  The double membrane filter prevents cross-contamination, and the EZ Grip nosepiece allows for quick and easy filter replacement should over-pipetting occur.

You can also opt for the gravity drain model, which substitutes a gravity drain function for the fast mode on the dispense button.

Upgrade your pipetting game today with the Pipet-Aid XP and experience why users worldwide make Drummond Scientific their sample handling partner.

Portable Pipet-Aid®

A must-have precision device for technicians and specialists worldwide. This reliable and durable tool ensures consistent and accurate results, making it an indispensable part of any laboratory. With cordless functionality and a flow rate of better than 25 mL in 5 seconds when using a 100 mL pipette, the Portable Pipet-Aid® is the go-to choice for professionals who demand the best.

Pipet-Aid® XP Gravity

Similar to our standard XP model but has two key differences. In addition to the burgundy-colored buttons, clip, and nosepiece, it features a gravity (G) setting that allows for the dispensing of contents without activating the motor. This method is commonly used with volumetric pipettes.   
 

Proudly made in the USA! Click here for more made in America products!

Drummond Pipet-Aid® XP2

The most comfortable instrument in the laboratory, the Pipet-Aid® XP2 Controller combines industry-leading technology with unparalleled ergonomic design. Created for extended operation, the Portable Pipet-Aid® XP2 can be charged while in use, and the robust power source provides the power and accuracy needed for your most trusted equipment.

Three-speed settings provide ideal flow management during liquid transfer, and our Ultra Quiet Precision Pump gives you unprecedented control for aspiration or dispensing. The unit has a power supply/charger, four extra filters, and a removable stand.   
 
 
 Specifications

Proudly made in the USA! Click here for more made in America products!

Drummond Pipet-Aid® XL

The Pipet-Aid® XL Pipette Controller adds comfort without giving up control when under a hood. Repetitive lifting and angling the arm can be exhausting. Arm motion is reduced, and extended pipet use is made easier with the ergonomically designed, longer handle and adjustable sliding hand rest. Enjoy the accuracy, performance, and convenience of our industry-leading Pipet-Aids in a state-of-the-art tool that alleviates arm fatigue.

The Pipet-Aid® XL also features a new, quieter, more powerful pump and comes complete with a power supply/charger, four extra filters, a holster-type wall bracket, and a removable stand.

Pipet-Aid® Hood Mate®

The Pipet-Aid® Hood Mate® offers a comfortable and portable solution for working under a hood. Its lightweight handle has nine fill/empty speed settings and proportional fingertip controls. The dedicated motor housing frees up space, and the winding vacuum/pressure line enters the handle from the top, ensuring safe pipetting under a hood.

Get the dependability of a permanent laboratory fixture with the added convenience of portability. Upgrade to the Pipet-Aid® Hood Mate® today!

Proudly made in the USA! Click here for more made in America products!

 
Benchmark™ Roto-Therm™ Incubated Rotators

• Rotated mixing with temperature control
• Includes tube holders for common tube sizes
• Available with variable speed control and advanced shaking / mixing modes: Mix (Oscillating), Pause, Rock (Plus Model)

The Roto-Therm™ series of incubated rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization, etc. The mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5 mL to 50 mL. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing.  

For applications requiring temperature control, the Roto-Therm™ series can be digitally programmed to maintain chamber temperatures of ambient 5°C to 60°C and include an “in-lab” calibration function for ensuring accurate temperature control.

The Roto-Therm™ is also available in a “Plus” configuration, providing the following additional features:

• Variable speed: 5 to 70 rpm
• “Mix” function: Rotating in combination w/ oscillations (increased mixing)
• “Pause” function: Rotating with intermittent “stops” during rotation
• “Rock” function: Back and forth, gentle rocking motion (see-saw)

The Plus model also offers an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2 mL tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode.

Specifications
 

Model	H2020	RTP2024
Temperature	Ambient 5° to 60°C
Speed	24 rpm	5 to 70 rpm
Mixing Modes	N/A	Mix, Pause, Rock
Dimensions	11.6 x 8.5 x 9 In. | 29.5 x 21.6 x 22.9 cm
Weight	9 lbs. | 4 kg.	10 lbs. | 4.5 kg.
Electrical	115 or 230 V, 50-60 Hz, 0.5 A	Universal Voltage 100 to 240 V, 50-60 Hz, 0.5 A
Warranty	2-Year

 

Item #s H2020 and RTP2024 are proudly made in the USA! Click here for more made in America products!

 
Benchmark™ MyBath™ Water Bath Series

The MyBath™ series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a MyBath™ to fit every lab.

Easy-to-use controls allow the user to digitally select and monitor settings. Adjustable in 0.1°C increments, the temperature is shown on a large, 3-digit display. The proprietary Quick-CAL™ feature allows for simple, in-lab calibration. High-efficiency insulation maintains temperature stability and uniformity within the bath while keeping the housing cool to the touch.

All the MyBath™ models feature seamless, stainless-steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination. The larger 8 L and 12 L units have drains for hassle-free water changes.

The 4 L, 8 L, and 12 L models include a see-through cover that can be removed or flipped back on a rear hinge to conserve bench space. The lid's gabled design will divert condensation to the front and back of the bath, away from samples.

Racks are available to accommodate 1.5 / 2.0 mL (B2000-4-T1520); 15 mL (B2000-8-T150); and 50 mL (B2000-8-T500) in the 8 L and 12 L MyBath™.

The capacity for the 8 L and 12 L MyBath™ is as follows: 2 B2000-4-T1520, 1 B2000-8-T500, 1 B2000-8-T150.

Specifications

	2 Liter	4 Liter	8 Liter	12 Liter
Item Number	B2000-2	MB2000-4	B2000-8	B2000-12
Temperature Range	Ambient + 5 to 100°C
Temp. Accuracy	±0.2°C at 37°C		±0.5°C at 37°C
Temp. Increments	0.1°C
Temp. Uniformity	±0.2°C at 37°C
Exterior (WxDxH)	6.5 x 8 x 6 in.	7.7 x 13.9 x 9 in.	17.5 x 10.5 x 12.4 in.	18 x 10.5 x 16.2 in.
Chamber (WxDxH)	5.5 x 6 x 4 in.	5.3 x 9.4 x 5.5 in.	12.8 x 10.4 x 5.9 in.	12.8 x 10.4 x 7.9 in.
Weight	4.5	15	17	17
Electrical	115 or 230 V, 50-60 Hz

  

Item # B2000-2 is proudly made in the USA! Click here for more made in America products!

PRO Scientific Bio-Gen PRO200 Homogenizer

The PRO Scientific Bio-Gen PRO200 Homogenizer is a compact, handheld solution for precise and efficient sample processing. Built with a lightweight ergonomic design and a 144-watt high-torque motor, this homogenizer delivers variable speeds from 5,000 to 35,000 rpm, making it ideal for tubes and small beakers. For continuous operation, it includes a separate on/off switch and can be mounted on an optional stand assembly (sold separately).

The PRO200 is ideal for cell disruption, tissue homogenization, liquid emulsions, and small solid sample processing. It can break down samples to nanoparticle levels as small as 1 micron, ensuring consistent results for research and laboratory applications. Built in the USA and backed by a 2-year warranty, the PRO200 combines durability, precision, and ease of use for everyday lab needs.

Main Attributes

• Compact, easy-to-use design for reliable sample preparation
• Variable speed control: 5,000 to 35,000 rpm
• Processes samples from 0.03 mL to 500 mL with consistency
• Handheld or stand-mounted operation
• Made in the USA
• 2-year warranty 

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination.

PRO Scientific Generator Probes

Stand Assembly (sold separately)

• Used for Bio-Gen PRO200 Homogenizer
• Great small footprint of 8 x 7 In.
• Includes Post, Cross Rod, Clamp, and Flat Base

* Sample piece size and quantity will affect breakdown. Sample solid piece size should not be larger than the diameter of the generator probe. For the most efficient homogenization of solids, the sample diameter of the largest solid should not be larger than the probe diameter.
 

Proudly made in the USA! Click here for more made in America products!

PRO Scientific Digital Benchtop Homogenizers

PRO Scientific Digital Benchtop Homogenizers combine power, precision, and advanced technology for superior performance in laboratory homogenization. Equipped with a 1305-watt high-power motor and digital speed controls, this homogenizer delivers unmatched reliability and durability for demanding lab applications.

Its 3-turn speed knob allows fine RPM adjustments in increments of hundreds rather than thousands, while the bright LED display ensures easy, accurate control. Additional features include a Dual-Power Light Indicator for quick error identification and the PRO TRAC motorized stand, which provides effortless, accurate, and smooth motor positioning, making this one of the most advanced benchtop homogenizers available.

For applications requiring extra height, choose the PRO400DSEL version, which includes an extended stand height of 31 inches (standard model: 14.5 inches).

Main Attributes

• Digital benchtop homogenizer with advanced speed control
• Powerful 1305-watt motor for large-scale processing
• Bright LED display and user-friendly interface
• Processes volumes from 10 mL to 30 L*
• Motorized PRO TRAC stands for precision positioning
• Extra-length stand option available for taller containers (PRO400DSEL model)
• Made in the USA
• 2-year warranty 

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination.

PRO Scientific Generator Probes

*Higher volumes depend on sample viscosity.
 

Proudly made in the USA! Click here for more made in America products!

PRO Scientific PRO250 Homogenizer

The PRO Scientific PRO250 Homogenizer delivers powerful, durable performance for a wide range of sample sizes. Combining a lightweight, ergonomic design with a 3/4 HP, 576-watt motor, this homogenizer offers variable speeds from 5,000 to 30,000 rpm, making it ideal for both handheld and stand-mounted applications.

Main Attributes

• Processes samples from 0.05 mL to 5 L
• Variable speed control: 5,000 to 30,000 rpm
• Overload and overheat sensors for safety
• Compatible with 5 mm to 30 mm generator probes (sold separately)
• Handheld or stand-mounted operation
• Made in the USA
• 2-year warranty 

The PRO250 is perfect for cell disruption, tissue homogenization, liquid emulsions, and nanoparticle-level sample breakdown (as small as 1 micron). Built with precision in small-batch production and tested for quality, PRO homogenizers maintain a failure rate of less than 1%. For viscous samples, adding a Deflector Head to your probe improves sample movement and maximizes homogenization efficiency.

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination.
 
PRO Scientific Generator Probes 

Stand Assembly (sold separately)

• Used for Bio-Gen PRO250 Homogenizer
• Great small footprint of 9 x 7 In.
• Includes Post, Cross Rod, Clamp, and Flat Base 

Proudly made in the USA! Click here for more made in America products!

PRO Scientific PRO25D Digital Homogenizer

The PRO Scientific PRO25D Digital Homogenizer is a compact yet powerful solution for precise sample processing. Featuring a bright LED display and user-friendly digital controls, this homogenizer allows you to fine-tune speeds from 0 to 30,000 RPM, ensuring accurate and consistent results across a wide range of applications.

Main Attributes

• Processes volumes from 0.05 mL to 3.5 L*
• Digital speed control with LED display for precision
• Ideal for homogenizing, emulsifying, blending, and mixing
• Includes U-shape stand assembly for stability
• Made in the USA
• 2-year warranty 

The PRO25D is perfect for cell disruption, protein extraction, emulsions, suspensions, medical research, and pharmaceutical processing. Compatible with PRO generator probes (5 mm to 30 mm), this homogenizer can break down samples to nanoparticle levels as small as 1 micron. Built in small-batch production with rigorous testing, PRO homogenizers maintain a failure rate of less than 1%.

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination. 

PRO Scientific Generator Probes

*Viscous samples will reduce max capacity. Adding a Deflector Head to your Probe will facilitate movement of your sample during homogenization and help increase max volume homogenization.

*Higher volumes depend on sample viscosity.
 

Proudly made in the USA! Click here for more made in America products!