PR1MA™ Agar Noble, Powder

CAS Number: 9002-18-0
Solubility: Water with Heat
Storage Temp: Room Temperature

Ultra-high purity Agar recommended for use in applications where maximum clarity and purity are essential. Thorough bleaching and washing procedures are utilized to remove trace amounts of ash and mineral contaminants.

Concentrations of 3-8 g/L obtains a semi-solid gel.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White to pale yellow crystalline powder
• ASH (Residue Ignition): ≤ 1.6 %
• Gelling Point: 32 - 39 °C
• Melting Point: 80 - 95 ^oC
• Moisture : ≤ 12.0 %
• pH (1.5% solution): 5.5 - 7.2

PR1MA™  Spectinomycin Dihydrochloride Pentahydrate

CAS Number: 22189-32-8
Molecular Weight: 495.3
Chemical Formula: C₁₄H₂₄N₂O₇ • 2HCl • 5H₂O
Solubility: Water
Storage Temp: 2-8°C

Aminocyclitol antibiotic that inhibits protein synthesis. Cell culture tested.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White or almost white, Slightly hygroscopic powder
• Identification: Pass Test
• pH @25 °C: 3.8 - 5.6
• Potency : ≥ 603 IU/mg
• Residue after Ignition: ≤ 1.0 %
• Solubility: Clear and colorless to light yellow
• Specific Rotation: +15 - +21 °
• Water (KF): 16.0 - 20.0 %

PR1MA™ Mitomycin C

CAS Number: 50-07-7
Molecular Weight: 334.3
Chemical Formula: C₁₅H₁₈N₄O₅
Solubility: Ethanol
Storage Temp: 2-8°C 

Antineoplastic antibiotic that acts as an alkylating agent after activation and also suppresses the synthesis of nucleic acids. A cell-cylce non specific agent, most active in the late G1 and early S phases.

WARNING! This product can expose you to Mitomycin-C, a chemical which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Blue violet solid
• Identification (UV): Conforms
• Purity-HPLC (RP CH₃CN:H₂O-0-100%): ≥ 99.0 %
• Purity-HPLC (RP MEOH:H₂O-90-10): ≥ 98.0 %
• Purity-TLC (CH₂CL₂:MEOH- 9:1): ≥ 98.0 %
• Solubility (10 mg/ml MEOH): Clear Blue Solution

PR1MA™  HEPES, Free Acid [N-(2-Hydroxyethyl) piperazine N'-(2-ethanesulfonic acid)]

Common Name: [N-(2-Hydroxyethyl) piperazine N'-(2-ethanesulfonic acid)]
CAS Number: 7365-45-9
Molecular Weight: 238.3
Chemical Formula: C₈H₁₈N₂O₄S
Solubility: Water
Storage Temp: Room Temperature

Zwitterionic N-substituted aminosulfonic acid buffer.

• pka (25°C): 7.5
• pH Range (Working): 6.8 - 8.2
• Heavy Metals: <0.001% Max

• Appearance: White Crystalline Powder
• Assay (Titration, dried basis): ≥ 99.5 %
• DNase, RNase, protease: Not Detected
• Endotoxin (0.2% Solution): ≤ 0.25 EU/ml
• Heavy Metals (as Pb): ≤ 0.001 %
• Identification (IR): Pass
• Iron (Fe): ≤ 0.0005 %
• Loss on Drying: ≤ 1.0 %
• pH (5% in water): 5.0 - 6.5
• pKa @ 20°C: 7.35 - 7.70
• Residue on Ignition: ≤ 0.1 %
• Solubility (1M Solution in Water ): Clear and Colorless Solution
• Sulfate: ≤ 0.05 %
• UV Absorbance (1M@260nm): ≤ 0.05
• UV Absorbance (1M@280nm): ≤ 0.05

PR1MA™ Peptone, Soy 

CAS Number: 91079-46-8
Solubility: Water
Storage Temp: Room Temperature

From papaic hydrolysis of soybean meal. Low NaCl content.

Research or further manufacturing use only, not for food or drug use.

• Amino Nitrogen: ≥ 2.2 %
• Ash: ≤ 15 %
• Loss on Drying: ≤ 6.0 %
• pH (2% water) @25°C: 6.5 - 7.5
• Total Nitrogen: ≥ 7.0 %
• Coliform: Negative
• E.Coli: Negative
• Molds and Yeasts: ≤ 100 cfu/g
• Salmonella: Negative /25g
• Standard Plate Count : ≤ 5000 cfu/g
• Broth Formulations (Growth Supporting Properties): Satisfactory
• Peptone Agar (Growth Supporting Properties): Satisfactory
• Country of Origin of Raw Material : Report
• Raw Material Species: Plant
• Country of Origin of Enzymes : Report
• Enzyme Species: Porcine
• Country Of Manufacture: Report

PR1MA™  Tris Base Ultra Pure [Tris (Hydroxymethyl) Aminomethane]

Common Name: Tris (Hydroxymethyl) Aminomethane
CAS Number: 77-86-1
Molecular Weight: 121.1
Chemical Formula: C₄H₁₁NO₃
Solubility: Water
Storage Temp: Room Temperature

Highly purified for use in molecular biology applications.

Moisture: <0.2%
Color: <20 APHA (colorless)
Heavy Metals (as Pb): <0.0001%
Insoluble Matter: <0.005%
Heavy Metals: 5 ppm
pKa (20°C): 8.1 ± 0.1

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Purity (Dried Basis By GC): ≥ 99.9 %
• Related Substances By GC: ≤ 0.1 %
• Water: ≤ 0.2 %
• Loss on Drying @ 105 ^oC, 3hrs: ≤ 1.0 %
• Melting Point: 170 - 172 ^oC
• APHA Color, 20% Aqueous solution: ≤ 20
• Insoluble Matter: ≤ 0.005 %
• Heavy Metals (as Pb): ≤ 5 ppm
• Residue on Ignition: ≤ 0.5 %
• Iron (Fe): ≤ 5 ppm
• UV Absorbance @260nm, 10% Aqueous solution : ≤ 0.03
• UV Absorbance @280nm, 10% Aqueous solution : ≤ 0.02
• UV Absorbance @290nm, 40% solution in H₂O: ≤ 0.20
• UV Absorbance @430nm, 10% Aqueous solution : ≤ 0.004
• Identification A: Pass
• Identification B: Pass
• Identification C: Pass
• pH (5% in water): 10.0 - 11.5
• Arsenic (As): ≤ 1 ppm
• Chloride: ≤ 100 ppm
• Copper (Cu): ≤ 1 ppm
• DNase, RNase, protease: None Detected
• Lead: ≤ 1 ppm
• Magnesium (Mg): ≤ 1 ppm
• pH (1M in H₂O): 10.5 - 11.5
• Residual Solvents: Conforms to USP/EP
• Residue on Ignition (USP): ≤ 0.1 %
• Solubility (2M In H₂O): Pass

PR1MA™  Doxycycline Hydrochloride 

• Appearance: Yellow crystalline powder
• Absorbance (349nm): 300 - 335
• Ethanol: 4.3 - 6.0 %
• Heavy Metals : ≤ 50 ppm
• Identification (A, B, C): Pass Test
• Light Absorbing Impurities (490nm): ≤ 0.5
• pH: 2.0 - 3.0
• Potency : 800 - 920 µg/mg
• Purity: 95.0 - 102.0 %
• Related Compound (6-Epidoxycyline): ≤ 2.0 %
• Related Substance (Any Other Impurity): ≤ 0.5 %
• Specific Optical Rotation: -120 - -105 ^o
• Sulfated Ash: ≤ 0.4 %
• Water: 1.4 - 2.8 %

PR1MA™  Metronidazole

• Appearance: White or yellowish powder
• Assay (Dry Basis): 99.0 - 101.0 %
• Identification: Conform
• Sulfated Ash: ≤ 0.1 %
• Non Animal Origin: Non Animal Origin
• Country of Origin: Report

PR1MA™ Potassium Phosphate, Dibasic, Anhydrous

CAS Number: 7758-11-4
Molecular Weight: 174.2
Chemical Formula: K₂HPO₄
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Powder
• Assay: ≥ 98.0 %
• Chloride: ≤ 0.003 %
• Heavy Metals : ≤ 5 ppm
• Insoluble Matter: ≤ 0.01 %
• Iron (Fe): ≤ 0.001 %
• Loss on Drying @150 ^oC: ≤ 1.0 %
• Nitrogen Compound: ≤ 0.001 %
• pH (5%): 8.5 - 9.6
• Sodium (Na): ≤ 0.05 %
• Sulfate: ≤ 0.005 %

PR1MA™  Tetracycline Hydrochloride

• Appearance: Yellow, Crystalline Powder
• Identification (A, B, C): Pass Test
• Specific Rotation: -255 - - 240 °
• Crystallinity: Meets with specification
• pH (1% Solution): 1.8 - 2.8
• Loss on Drying (105 ^oC): ≤ 2.0 %
• Epitetracycline: ≤ 3.0 %
• 4-Ephianhydrotetracyline: ≤ 2.0 %
• Anhydrotetracycline: ≤ 0.5 %
• 2-Acetyl-2-Decarbamoyltetracycline: ≤ 1.5 %
• Chlortetracycline: ≤ 0.5 %
• Sum of impurities other than epitetracycline: ≤ 5.0 %
• Assay of Tetracycline Hydrochloride (On Dried Basis): ≥ 900 µg/mg
• Residual Solvent (1-Butanol): ≤ 5000 ppm
• Residual Solvent (Acetone): ≤ 500 ppm
• Grade: USP
• Country of Origin: Report

PR1MA™  Trimethoprim

CAS Number: 738-70-5
Molecular Weight: 290.3
Chemical Formula: C₁₄H₁₈N₄O₃
Solubility: DMSO 50mg/ml, Methanol 12:1 mg/ml, Water 0.4 mg/ml
Storage Temp: 2-8°C

Inhibits dihydrofolate reductase. Active against most gram negative and gram positive aerobic bacteria.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Off White to Light Yellow Crystalline Powder
• Assay (Anhydrous): 98.5 - 101 %
• Heavy Metals : ≤ 20 ppm
• Loss on Drying: ≤ 1.0 %
• Melting Point: 199 - 203 ^oC
• Related Substances: ≤ 0.2 %
• Sulfated Ash: ≤ 0.1 %

PR1MA™ Sulfamethoxazole

CAS Number: 723-46-6
Molecular Weight: 253.3
Chemical Formula: C₁₀H₁₁N₃O₃S
Solubility: Acetone
Storage Temp: Room Temperature

Bacteriostatic antibiotic that inhibits nucleic acid synthesis in sensitive micro-organisms.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White to Off White Crystalline Powder
• Infrared Spectrum: Conforms to Structure
• Loss on Drying: ≤ 0.5 %
• Residue on Ignition: ≤ 0.1 %
• Related Substance (Sulfanilic acid): ≤ 0.10 %
• Related Substance (Sulfanilamide): ≤ 0.10 %
• Related Substance (Impurity C, A): ≤ 0.10 %
• Related Substance (Impurity B): ≤ 0.10 %
• Related Substance (Impurity F): ≤ 0.10 %
• Any other Impurity: ≤ 0.10 %
• Total impurities: ≤ 0.30 %
• Assay (Titration): 99.0 - 101.0 %
• Grade: USP
• Country of Origin: Report